Bedienungsanleitung Melitta caffeo n 86 e 915 (Seite 15 von 57) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Schwedisch)

361887

Zoom out

Zoom in

Vorherige Seite

1/57

Nächste Seite

25 26

Making coffee...

8.2 ...with ground coffee

With the appliance ready for use, turn the

coffee bean container (2) to the position for

ground coffee operation, Fig. G

. The brewing

strength display is extinguished.

Should there be any beans in the ground

coffee chute (1), they will be stuck between

the housing and the ground coffee chute. You

can remove these beans by setting the bean

selector switch to the mid-position and remo-

ving the coffee bean container (2), Fig. H, I

Take off the chute lid for ground roasted coffee

(1) and put in fresh ground coffee.

Use a level scoop to dose for one or two cups

of coffee. Dose to select the desired brewing

strength.

Pointer: Fig. J Never put in more than 2 level

scoops of ground roasted coffee so as not to

overfill the brewing chamber. Only ground

coffee may be used. Instant coffee might clog

up the brewing unit.

Replace the lid on the chute. Turn the function

controller (20) to select the quantity for 1 cup,

2 cups or carafe brewing. Your selection deter-

mines which filling capacity and symbol are

shown in the display. Now place the cup or

cups under the height-adjustable coffee

outlet (12), Fig. F

Any quantity of water between 15 -200 ml

can be set. Use the water quantity regulator

keys (25) to select the quantity of water. The

water quantity bar increases when the upper

key is pressed and decreases when the lower

one is pressed. The selected quantity in ml is

shown in the display. The name for the coffee

speciality you have selected varies in line with

the quantity.

After making your selection, press the start

key (22). Re-pressing the start key will stop

coffee being dispensed.

Pointer: If you have selected carafe brewing,

you will again be asked to pour in ground

coffee after the first brewing. The maximum

supply volume of 400 ml for carafe brewing

matches the capacity of the supplied Melitta

carafe.

Individual and direct selection keys

This machine has 6 individually programmable

keys. You can programme your favourite coffee

or, for example, match various coffees to the

cup size of your tableware.

9.1 Individual selection keys

The individual selection keys (24) allow you

to select your own personal coffee. They allow

you to store your own personal coffee settings,

as described below:

Select the brewing strength (19) and water

quantity (25) for your personal coffee.

Save this setting by pressing the individual

key for more than 3 seconds.

If programming is successful, “OK” flashes

on the display.

When you next select “your” key, the setting

you have programmed appears in the display.

9.2 Direct selection keys

The direct selection keys (23) have fixed

symbols. The small cup stands for Espresso,

the medium-sized cup for Café Crème and

the large cup for a large Café Crème. Although

the settings for these cups are saved in the

machine, they can also be programmed – just

as with the individual selection keys. The

selection you make by pressing the key

appears in the display.

Making coffee...

8.1 ...with coffee beans

When the appliance is ready for operation,

turn the coffee bean container (2) to the

position for coffee-bean operation, Fig. D

Remove the coffee bean container lid and fill

with fresh beans. Only fill the container with

coffee beans and no higher than a max. of 1

cm under the rim of the container. This is to

stop the container possibly spilling when

adjusting for the bean type.

Tip: This appliance is fitted with the Bean Select

two-chamber bean container. Each chamber

can hold some 100 g of coffee beans. To enjoy

the full variety, fill one chamber with e.g.

espresso beans and the second one with café

crème beans. You can mark the kind of coffee

by placing the supplied sticker on the bean

container.

Then replace the lid on the container. Select

the desired coffee by setting the bean container

switch (3) appropriately. The bean selector

switch points to the chamber supplying the

beans.

Pointer: Fig. E When setting the bean selector

switch, the shape of the coffee beans might

cause some beans to get stuck. These beans

can be freed and the switch shifted by turning

the switch again and moving the beans about

in the container. If the bean selector switch is

set in a vertical position when brewing, this

will prevent beans from getting into the grinder.

The result will be a watery coffee.

Since some coffee beans always remain above

the grinder, switching over to a different bean

type produces intermixing in the first cup of

coffee. If you want to be sure of preparing a

pure cup of coffee, we would advise brewing a

small cup of coffee first and throwing it away.

The second cup after switching over will then

be exactly as requested – this is particularly

important when using decaffeinated coffee

blends and for users who may be allergic to

caffeine.

Turn the function controller (20) to select the

quantity for 1 cup, 2 cups or carafe brewing.

Your selection determines which filling capacity

and symbol are shown on the display. Now

place one or two cups or the Melitta

carafe

under the coffee outlet (12)

, Fig. F. By pressing

the individual or direct selection keys (24, 23)

you can select a coffee or set your own indi-

vidual coffee taste. Make use of the brewing

strength (19) and water quantity (25) regu-

lators.

The brewing strength is continuously variable

from very mild (mild +) to very strong (strong

+). Select your desired brewing strength using

the brewing strength regulator keys (19). The

brewing strength bar increases when the upper

key is pressed and decreases when the lower

one is pressed.

Any quantity of water between 15-200 ml can

be set. Use the water quantity regulator (25)

to select the water quantity. The water quantity

bar increases when the upper key is pressed

and decreases when the lower one is pressed.

The selected quantity in ml is shown in the

display. The name of the coffee speciality you

have selected varies in line with the water

quantity chosen.

After making your selection, press the start

key (22). Re-pressing the start key will stop

coffee being dispensed.

With carafe brewing, you can brew a larger

quantity of coffee at one go. This is particularly

useful when making more than 2 cups or

coffee/milk specialities.

Pointer: The maximum supply volume of 400

ml for carafe brewing matches the capacity of

the supplied Melitta

carafe.

Actual coffee consumption is between 6–16 g.

This depends on the amount of water used

and the strength of the coffee.

ENGLISH

Melitta caffeo n 86 e 915 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info