Bedienungsanleitung Melitta Look Therm Timer (Seite 6 von 40) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

712195

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Hardness

setting

I II III IV

°dH

<7°

7-14°

14-21°

>21°

Display 

2 3 4

Therm jug

• Do not use the pot in the

micro wave.

• Do not place the pot on a hot

oven.

• Do not use the pot to store

milk products or baby food as

bacteria could develop.

• Do not lay the pot on its side

if it contains liquid as the liquid

could leak.

• Clean tenacious staining with

special cleaner.

• Use a soft damp cloth to clean

the exterior.

2. Before rst use:

• Ensure that the power supply in your home

corresponds to that on the model plate on the

base of the appliance.

• Connect the appliance to a power source. Unused

cable can be stored in the base of the appliance. 

• Set the current time using the buttons “h” and “m”

. This goes faster if you hold down the button.

The appliance is only ready to use once the

time has been set. You can turn the display light

on or o by simultaneously pressing the h and m

buttons  for longer than two seconds

• All appliances have been tested during production

to ensure they work perfectly. Therefore there may

be for example water deposits remaining. Rinse the

appliance twice with the maximum amount of water

and without a ﬁlter bag or ground coee, in order to

clean it.

• For the best coee enjoyment and convenient use,

the appliance is equipped with various features.

These features are explained below.

3. Set water hardness

Depending on water hardness lime scale may build up

in the appliance. This increases the appliance’s energy

consumption as lime scale on the heating element can

prevent the water heating eectively. To avoid damage

the appliance must be descaled regularly. The descaling

display helps you in this. If the CALC-button  is

permanently lit this shows that the appliance needs to

be descaled.

The appliance is pre-set for a high level of water

hardness (level 4). You can ﬁnd out the level of water

hardness in your area by asking your local water

provider or by using water hardness measuring strips

available in the shops. For softer water the descaling

display can be adjusted to descale less often.

• Hold down the CALC-button  and by brieﬂy

pressing the m-button  set the desired level of

water hardness. The hardness setting will then

show in the display

• Once you have set the desired level of water

hardness, let go of the CALC-button.

Your settings are now saved.

• The settings and display are shown in the table.

Please note:

• Water hardness cannot be programmed while brewing.

• The last water hardness level chosen remains even

after removing the power cable.

4. Making coffee

• Ensure that the appliance is connected to

the power source.

• Open the lid on the water tank. 

• Fill the water tank with the desired amount of water

using the therm jug. With the help of the water level

display on the tank  you can choose the correct

number of cups.

Small cup symbol = approx. 85ml coee per cup,

large cup symbol = approx. 125 ml coee per cup.

• Close the lid on the water tank and place the therm

jug with closed lid in the appliance.

• Open the swivel ﬁlter  to the left.

• Fold a Melitta

ﬁlter bag 1x4

at the embossed seam

and place it in the ﬁlter holder.  Press the ﬁlter bag

into the ﬁlter holder by hand, to ensure a good ﬁt.

• Put the ground coee into the ﬁlter. The amount

depends on your personal taste. We recommend

using 6g of ground coee per large cup.

• Swivel the ﬁlter back into the appliance.

An audible click tells you it is inserted properly.

• With the Melitta

AromaSelector

 you can set

the taste of your coee with just one hand: From

mild-aromatic (

)to strong intensive (

• Turn the appliance on . Brewing begins.

• The appliance turns of automatically short after

brewing. This avoids unnecessary use of electricity

and saves energy. You can of course turn the

machine o manually at any time.

• The drip stop prevents your coee from dripping

when you remove the pot from the appliance. 

• With the help of the detachable inner ﬁlter you can

dispose of the ﬁlter bag simply and easily.

5. Using the insulated pot

• The brewed coee ﬂows through the central valve in

the insulated lid of the pot.

• To pour coee press down on the sealing lever .

• Remove the lid simply by pressing the seals on the

side while lifting the lid up .

G B

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Melitta Look Therm Timer Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info