Bedienungsanleitung Mellerware Vapour II - 23160 (Seite 4 von 26) (Englisch, Französisch, Portugiesisch, Spanisch)

799547

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

CAUTION: Iron from low temperature first then move

to high temperature fabrics. Should you need to iron at

a low temperature, after using a high temperature you

must wait for the pilot light to illuminate again, or you

will burn your clothes onto the iron. This will void the

warranty.

3.4. Dry ironing:

3.4.1. Make sure the temperature selection knob is at

the lowest level.

3.4.2. Set the iron on the support base on a steady,

firm surface.

3.4.3. Plug the appliance to the electrical power supply

and turn temperature selection knob to desired level,

the ready indicator light will turn on.

3.4.4. Once the light turns off, you may star to iron

over steady and firm surface.

3.4.5. When you have finished, turn the temperature

knob back to the lowest level, unplug from the electrical

power supply and wait until the appliance cools down

completely, before you proceed to store it.

IMPORTANT: If the iron contains water inside the tank

and you prefer dry ironing, move the steam control

lever to “0” position.

3.5. Steam ironing:

3.5.1. Make sure the appliance is unplugged from the

electric power supply, fill up the water tank. Make sure

not to overfill the tank.

3.5.2. Ensure the temperature selection knob is at the

lowest level, before plugging in the appliance.

3.5.3. Set the iron on its support base on a steady and

firm surface.

3.5.4. Plug in the iron and set the steam control lever

to the medium level.

3.5.5. Turn the temperature selection knob to the

desired level, suited for steam generation and the ready

indicator light should turn on.

3.5.6. Once the light turns off you may start ironing on

a steady and firm surface.

IMPORTANT: It is important to let the light to turn after

reaching the optimal temperature, otherwise the appli-

ance may experience leakage

3.5.7. Once you have finished its use, turn the

temperature selection knob back to the lowest, unplug

the appliance from the electrical power supply and

make sure to wait until completely cools down before

storing it.

IN ORDER TO STEAM IRON, HIGH TEMPERATURES

SHOULD BE SELECTED AT THE TEMPERATURE INDI-

CATOR KNOB.

3.6. Spray:

Spraying garments helps smooth out wrinkles to make

ironing easier.

3.6.1. Point the tip of the iron where you want to spray

the water and press the spray button.

3.6.2. Iron the garment as usual. To use this function, it

will be necessary to fill the water tank.

3.7. Burst of steam.

Steam ironing reduces ironing time and takes care of

the appliance.

3.7.1. Press the burst of steam button. Wait a few

seconds until the steam penetrates the fibres of the

garment before pushing the button again. For optimum

steam quality, do not apply more than three successive

bursts.

3.7.2. The spray button has to be pressed repeatedly to

release the first spray.

3.8. Vertical Ironing:

It is possible to iron hanging curtains, items of clothing

on their own hanger, etc. To do so, follow the below

instructions:

3.8.1. Select the irons maximum temperature by turn-

ing the iron’s temperature regulator clockwise.

3.8.2. Iron from top to bottom while pressing the steam

control button. Important: for cotton and linen, it is

recommended to put the base of the iron in contact

with the material. For other more delicate fabrics, it is

recommended to keep the base of the a few centime-

tres away.

3.9. Self-cleaning:

3.9.1. It is important to self-clean the appliance at least

once a month to remove calcium and any the built-up

minerals inside the iron.

3.9.2. Fill the water tank to its maximum level.

3.9.3. Place the iron in an upright position, plug into the

mains and select the maximum temperature.

3.9.4. Leave the appliance to heat up until the indicator

light turns off.

3.9.5. Unplug the appliance and place it in the sink.

3.9.6. Let the water flow out through the steam vents in

the base, while lightly shaking the appliance.

3.9.7. Release the button after a minute or when the

tank becomes empty.

3.9.8. Leave the iron in the upright position until it has

cooled.

3.10. How to deal with scale build up:

3.10.1. For the appliance to work correctly it should

be kept free of lime scale or magnesium incrustations

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mellerware Vapour II - 23160 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info