Bedienungsanleitung Mercedes AMG GT 2018 (Seite 258 von 294) (Englisch)

703617

258

Zoom out

Zoom in

Vorherige Seite

1/294

Nächste Seite

In order to signal a change of direction when

towing the vehicle with the hazard warning

lamps switched on, use the combination switch

as usual. In this case, only the indicator lamps

for the direction of travel flash. After resetting

the combination switch, the hazard warning

lamp starts flashing again.

Transporting the vehicle

When the vehicle is loaded for transport, the

front and rear axles must be stationary and on

the same transportation vehicle. Positioning

over the connection point of the transport

vehicle is not permitted. The drive train may

otherwise be damaged.

You may only secure the vehicle by the

wheels, not by parts of the vehicle such as

axle or steering components. Otherwise, the

vehicle could be damaged.

The towing eye can be used to pull the vehicle

onto a trailer or transporter for transporting pur-

poses.

Insert the SmartKey into the ignition lock. You

must use the SmartKey instead of the Start/

Stop button (

Y page 106).

Start the engine and leave it running during

the entire loading operation.

Move the transmission to position i with the

E-SELECT lever.

Check the transmission position using the

indicator in the multifunction display

(

Y page 114).

As soon as the vehicle has been loaded:

Prevent the vehicle from rolling away by

applying the electric parking brake.

Shift the automatic transmission to position

Turn the SmartKey to key position u in the

ignition lock and remove it.

Secure the vehicle.

Tow-starting (emergency engine

starting)

Vehicles with automatic transmission must

not be tow-started. You could otherwise dam-

age the automatic transmission.

You can find information on "Jump-starting"

under (

Y page 251).

Fuses

Important safety notes

WARNING

If you manipulate or bridge a faulty fuse or if

you replace it with a fuse with a higher amper-

age, the electric cables could be overloaded.

This could result in a fire. There is a risk of an

accident and injury.

Always replace faulty fuses with the specified

new fuses having the correct amperage.

Blown fuses must be replaced with fuses of the

same rating, which you can recognize by the

color and value. The fuse ratings are listed in the

fuse allocation chart.

The fuse allocation chart is on the fuse box in the

cargo compartment (

Y page 257).

If a newly inserted fuse also blows, have the

cause traced and rectified at a qualified special-

ist workshop, e.g. an authorized Mercedes-Benz

Center.

Only use fuses that have been approved for

Mercedes-Benz vehicles and which have the

correct fuse rating for the system concerned.

Otherwise, components or systems could be

damaged.

Make sure that no moisture can enter the

fuse box when the cover is open.

When closing the cover, make sure that it is

lying correctly on the fuse box. Moisture seep-

ing in or dirt could otherwise impair the oper-

ation of the fuses.

256

Fuses

Breakdown assistance

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mercedes AMG GT 2018 Seite 258

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Mercedes AMG GT 2018

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info