Bedienungsanleitung Mercedes AMG GT Roadster 2018 (Seite 292 von 294) (Englisch)

703629

292

Zoom out

Zoom in

Vorherige Seite

1/294

Nächste Seite

Coolant

Important safety notes

WARNING

If antifreeze comes into contact with hot com-

ponents in the engine compartment, it may

ignite. There is a risk of fire and injury.

Let the engine cool down before you add anti-

freeze. Make sure that antifreeze is not spilled

next to the filler neck. Thoroughly clean the

antifreeze from components before starting

the engine.

Only add coolant that has been premixed

with the desired antifreeze protection. You

could otherwise damage the engine.

Further information on coolants can be found

in the Mercedes-Benz Specifications for Ser-

vice Products, MB BeVo 310.1, e.g. on the

Internet at

http://bevo.mercedes-benz.com. Or con-

tact a qualified specialist workshop.

Always use a suitable coolant mixture, even

in countries where high temperatures prevail.

Otherwise, the engine cooling system is not

sufficiently protected from corrosion and

overheating.

Have the coolant regularly replaced at a

qualified specialist workshop and the replace-

ment confirmed in the service report.

Comply with the important safety notes for ser-

vice products when handling coolant

(

Y page 286).

The coolant is a mixture of water and anti-

freeze/corrosion inhibitor. It performs the fol-

lowing

task

anti-corrosion protection

antifreeze protection

raising the boiling point

If the coolant has antifreeze protection down to

-35 ‡ (-37 †), the boiling point of the coolant

during operation is approximately 266 ‡

(130 †).

The antifreeze concentrate/corrosion inhibitor

concentration in the engine cooling system

should:

be at least 50%. This will protect the engine

cooling system against freezing down to

approximately -35 ‡ (-37 †)

not exceed 55% (antifreeze protection down

to -49 ‡[-45 †]). Otherwise, heat will not be

dissipated as effectively

Mercedes-Benz recommends an antifreeze/

corrosion inhibitor concentrate in accordance

with MB Specifications for Service Products

310.1.

The coolant is checked with every maintenance

interval at a qualified specialist workshop.

When the vehicle is first delivered, it is filled

with a coolant mixture that ensures adequate

antifreeze and anti-corrosion protection.

The coolant is checked at specified intervals

at a qualified specialist workshop.

Filling capacities

Model Capacity

Mercedes-AMG GT

Roadster

13.5 US qt (12.8 l)

Mercedes–AMG GT

C Roadster

14.6 US qt (13.8 l)

Windshield washer system

Important safety notes

WARNING

Windshield washer concentrate could ignite if

it comes into contact with hot engine compo-

nents or the exhaust system. There is a risk of

fire and injury.

Make sure that no windshield washer con-

centrate is spilled next to the filler neck.

Only use washer fluid that is suitable for

plastic lamp lenses, e.g. MB SummerFit or MB

WinterFit. Unsuitable washer fluid could dam-

age the plastic lenses of the headlamps.

Only MB SummerFit and MB WinterFit

washer fluid should be mixed together. The

290

Service products and filling capacities

Technical data

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mercedes AMG GT Roadster 2018 Seite 292

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Mercedes AMG GT Roadster 2018

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info