Bedienungsanleitung Mercedes AMGGT 2017 (Seite 249 von 286) (Englisch)

703601

249

Zoom out

Zoom in

Vorherige Seite

1/286

Nächste Seite

Towing a vehicle with both axles on

the ground

It is important that you observe the safety

instructions when towing away your vehicle

(

Y page 245).

The automatic transmission automatically shifts

to position P when you open the driver's or front-

passenger door or when you remove the Smart-

Key from the ignition lock. In order to ensure

that the automatic transmission stays in posi-

tion N when towing the vehicle, you must

observe the following points:

Insert the SmartKey into the ignition lock. You

must use the SmartKey instead of the Start/

Stop button (

Y page 100).

Start the engine and leave it running during

the entire towing procedure.

Depress and hold the brake pedal.

Move the transmission to position N with the

E-SELECT lever.

Check the transmission position using the

indicator in the multifunction display

(

Y page 108).

Release the brake pedal.

Release the electric parking brake.

Switch on the hazard warning lamps

(

Y page 87).

In order to signal a change of direction when

towing the vehicle with the hazard warning

lamps switched on, use the combination switch

as usual. In this case, only the indica

tor l

amps

for the direction of travel flash. After resetting

the combination switch, the hazard warning

lamp starts flashing again.

Transporting the vehicle

When the vehicle is loaded for transport, the

front and rear axles must be stationary and on

the same transportation vehicle. Positioning

over the connection point of the transport

vehicle is not permitted. The drive train may

otherwise be damaged.

You may only secure the vehicle by the

wheels, not by parts of the vehicle such as

axle or steering components. Otherwise, the

vehicle could be damaged.

The towing eye can be used to pull the vehicle

onto a trailer or transporter for transporting pur-

poses.

Insert the SmartKey into the ignition lock. You

must use the SmartKey instead of the Start/

Stop button (

Y page 100).

Start the engine and leave it running during

the entire loading operation.

Move the transmission to position N with the

E-SELECT lever.

Check the transmission position using the

indicator in the multifunction display

(

Y page 108).

As soon as the vehicle has been loaded:

Prevent the vehicle from rolling away by

applying the electric parking brake.

Shift the automatic transmission to posi-

tion P.

Turn the SmartKey to position 0in the ignition

lock and remove it.

Secure the vehicle.

Tow-starting (emergency engine

starting)

Vehicles with automatic transmission must

not be tow-started. You could otherwise dam-

age the automatic transmission.

You can find information on "Jump-starting"

under (

Y page 243).

Towing and tow-starting

247

Breakdown assistance

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mercedes AMGGT 2017 Seite 249

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Mercedes AMGGT 2017

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info