Bedienungsanleitung Mercedes B-Class Electric Drive 2017 (Seite 256 von 290) (Englisch)

703589

256

Zoom out

Zoom in

Vorherige Seite

1/290

Nächste Seite

Vehicles with KEYLESS-GO: use the Smart-

Key instead of the Start/Stop button

(Y page 110).

Make sure that the vehicle is stationary.

Turn the SmartKey to position 2 in the ignition

lock.

When the vehicle is stationary, depress the

brake pedal and keep it depressed.

Shift the transmission to position P.

Release the brake pedal.

Release the electric parking brake.

Switch off the automatic locking

(Y page 166).

Switch on the hazard warning lamps

(Y page 89).

Turn the SmartKey in the ignition lock to posi-

tion 0 and leave the SmartKey in the ignition

lock.

Towing the vehicle with the rear axle

raised

When towing your vehicle with the rear axle

raised, it is important that you observe the

safety instructions (Y page 251).

The ignition must be switched off if you are

towing the vehicle with the rear axle raised.

Intervention by ESP

could otherwise dam-

age the brake system.

The transmission automatically shifts to posi-

tion P when you open the driver's or front-

passenger door or when you remove the Smart-

Key from the ignition lock. In order to ensure

that the transmission stays in position N when

towing the vehicle, you must observe the fol-

lowing points:

Vehicles with KEYLESS-GO: use the Smart-

Key instead of the Start/Stop button

(Y page 110).

Make sure that the vehicle is stationary.

Turn the SmartKey to position 2 in the ignition

lock.

Depress and hold the brake pedal.

Shift the transmission to position N.

Release the brake pedal.

Apply the electric parking brake.

Switch off the automatic locking

(Y page 166).

Bring the front wheels into the straight-ahead

position.

Switch on the hazard warning lamps

(Y page 89).

Turn the SmartKey in the ignition lock to posi-

tion 0 and leave the SmartKey in the ignition

lock.

Transporting the vehicle

All vehicles

You may only secure the vehicle by the

wheels, not by parts of the vehicle such as

axle or steering components. Otherwise, the

vehicle could be damaged.

Turn the SmartKey to position 2 in the ignition

lock (Y page 109).

Shift the transmission to position N.

As soon as the vehicle has been loaded:

Prevent the vehicle from rolling away by

applying the electric parking brake.

Shift the transmission to position P.

Turn the SmartKey to position 0in the ignition

lock and remove it.

Secure the vehicle.

The towing eye can be used to pull the vehicle

onto a trailer or transporter for transporting pur-

poses.

Fuses

Important safety notes

WARNING

If you manipulate or bridge a faulty fuse or if

you replace it with a fuse with a higher amper-

age, the electric cables could be overloaded.

This could result in a fire. There is a risk of an

accident and injury.

Always replace faulty fuses with the specified

new fuses having the correct amperage.

Only use fuses that have been approved for

Mercedes-Benz vehicles and which have the

correct fuse rating for the system concerned.

Only use fuses marked with an "S". Other-

254

Fuses

Breakdown assistance

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mercedes B-Class Electric Drive 2017 Seite 256

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Mercedes B-Class Electric Drive 2017

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info