Bedienungsanleitung Mercedes C-Class 2017 (Seite 365 von 370) (Englisch)

703595

365

Zoom out

Zoom in

Vorherige Seite

1/370

Nächste Seite

Further information on coolants can be found

in the Mercedes-Benz Specifications for Ser-

vice Products, MB BeVo 310.1, e.g. on the

Internet at http://bevo.mercedes-benz.com.

Or contact a qualified specialist workshop.

Always use a suitable coolant mixture, even

in countries where high temperatures prevail.

Otherwise, the engine cooling system is not

sufficiently protected from corrosion and

overheating.

Have the coolant regularly replaced at a

qualified specialist workshop and the replace-

ment confirmed in the Maintenance Booklet.

Comply with the important safety notes for ser-

vice products when handling coolant

(

Y page 358).

The coolant is a mixture of water and anti-

freeze/corrosion inhibitor. It performs the fol-

lowing tasks:

Anti-corrosion protection

Antifreeze protection

Raising the boiling point

If the coolant has antifreeze protection down to

-35 ‡ (-37 †), the boiling point of the coolant

during operation is approximately 266 ‡

(130 †).

The antifreeze concentrate/corrosion inhibitor

concentration in the engine cooling system

should:

be at least 50%. This will protect the engine

cooling system against freezing down to

approximately -35 ‡ (-37 †).

not exceed 55% (antifreeze protection down

to -49 ‡ [-45 †]). Otherwise, heat will not be

dissipated as effectively.

Mercedes-Benz recommends an antifreeze/

corrosion inhibitor concentrate in accordance

with MB Specifications for Service Products

310.1.

When the vehicle is first delivered, it is filled

with a coolant mixture that ensures adequate

antifreeze and anti-corrosion protection.

The coolant is checked with every mainte-

nance interval at a qualified specialist work-

shop.

Filling capacities

Model Capacity

C 300 d 4MATIC

10.6 US qt (10.0 l)

Mercedes-AMG

C 43 4MATIC

11.5 US qt (10.9 l)

Mercedes-AMG

C 63

Mercedes-AMG

C 63 S

11.7 US qt (11.1 l)

All other models

9.5 US qt (9.0 l)

Windshield washer system

Important safety notes

WARNING

Windshield washer concentrate could ignite if

it comes into contact with hot engine compo-

nents or the exhaust system. There is a risk of

fire and injury.

Make sure that no windshield washer con-

centrate is spilled next to the filler neck.

Only use washer fluid that is suitable for

plastic lamp lenses, e.g. MB SummerFit or MB

WinterFit. Unsuitable washer fluid could dam-

age the plastic lenses of the headlamps.

Only MB SummerFit and MB WinterFit

washer fluid should be mixed together. The

spray nozzles may otherwise become

blocked.

Do not use distilled or de-ionized water. Other-

wise, the level sensor may give a false reading.

When handling washer fluid, observe the impor-

tant safety notes on service products

(

Y page 358).

At temperatures above freezing:

Fill the washer fluid reservoir with a mixture of

water and windshield washer fluid, e.g. MB

SummerFit.

Add 1 part MB SummerFit to 100 parts water.

At temperatures below freezing:

Fill the washer fluid reservoir with a mixture of

water and washer fluid, e.g. MB WinterFit.

Service products and filling capacities

363

Technical data

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mercedes C-Class 2017 Seite 365

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Mercedes C-Class 2017

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info