Bedienungsanleitung Mercedes C-Class 2018 (Seite 367 von 370) (Englisch)

703610

367

Zoom out

Zoom in

Vorherige Seite

1/370

Nächste Seite

When handling engine oil, observe the important

safety notes on service products (

Y page 361).

The engine oils are matched to the performance

of Mercedes-Benz engines and service intervals.

You should therefore only use engine oils and oil

filters that are approved for vehicles with main-

tenance systems.

For a list of approved engine oils and oil filters,

consult an authorized Mercedes-Benz Center.

Or visit the website

http://bevo.mercedes-benz.com.

The table shows which engine oils have been

approved for your vehicle.

Gasoline engines MB-Freigabe or

MB-Approval

All models

229.5, 229.6

Diesel engines MB-Freigabe or

MB-Approval

All models

228.51, 229.31,

229.51, 229.52

Use only SAE 0W-40 or SAE 5W-40 engine oils

for Mercedes-AMG vehicles.

MB approval is indicated on the oil contain-

ers.

Filling capacities

The following values refer to an oil change

including the oil filter.

Model Capacity

C 300 4MATIC

Mercedes-AMG

C 43 4MATIC

6.9 US qt (6.5 l)

C 300 d 4MATIC

6.3 US qt (6.0 l)

Mercedes-AMG

C 63

Mercedes-AMG

C 63 S

9.5 US qt (9.0 l)

All other models

7.4 US qt (7.0 l)

Additives

Do not use any additives in the engine oil.

This could damage the engine.

Brake fluid

WARNING

The brake fluid constantly absorbs moisture

from the air. This lowers the boiling point of

the brake fluid. If the boiling point of the brake

fluid is too low, vapor pockets may form in the

brake system when the brakes are applied

hard. This would impair braking efficiency.

There is a risk of an accident.

You should have the brake fluid renewed at

the specified intervals.

When handling brake fluid, observe the impor-

tant safety notes on service products

(

Y page 361).

The brake fluid change intervals can be found in

the Maintenance Booklet.

Only use brake fluid approved by Mercedes-

Benz in accordance with MB-Freigabe or MB-

Approval 331.0.

Information about approved brake fluid can be

obtained at any qualified specialist workshop or

on the Internet at

http://bevo.mercedes-benz.com.

Have the brake fluid regularly replaced at a

qualified specialist workshop in accordance

with the replacement intervals and the

replacement confirmed in the Maintenance

Booklet.

Coolant

Important safety notes

WARNING

If antifreeze comes into contact with hot com-

ponents in the engine compartment, it may

ignite. There is a risk of fire and injury.

Let the engine cool down before you add anti-

freeze. Make sure that antifreeze is not spilled

next to the filler neck. Thoroughly clean the

antifreeze from components before starting

the engine.

Only add coolant that has been premixed

with the desired antifreeze protection. You

could otherwise damage the engine.

Service products and filling capacities

365

Technical data

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mercedes C-Class 2018 Seite 367

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Mercedes C-Class 2018

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info