Bedienungsanleitung Mercedes C-Class Coupe 2017 (Seite 349 von 354) (Englisch)

703599

349

Zoom out

Zoom in

Vorherige Seite

1/354

Nächste Seite

Filling capacities

The followingvaluesrefer to an oil change

includingthe oil filter.

Missing valueswere notavailable at time of

goingtoprint.

Model Capacity

Mercedes‑AMG

vehicles

C300

7.4USqt(7.0 l)

C300 4MATIC

6.9 US qt (6.5 l)

Additives

Do not useany additivesinthe engine oil.

Thiscould damagethe engine.

Brake fluid

WARNING

The brake fluid constantly absorbsmoisture

from the air. Thislowers the boiling point of

the brake fluid.Ifthe boiling point of the brake

fluid is too low, vapor pockets may form in the

brake system when the brakes are applied

hard. Thiswould impairbraking efficiency.

There is ariskofanaccident.

Youshouldhavethe brake fluid renewedat

the specified intervals.

Whenhandling brake fluid,observe the impor-

tant safety notes on service products

(

Y page 344).

The brake fluid change intervalscan be found in

the Maintenance Booklet.

Only usebrake fluid approved by Mercedes-

Benz in accordance with MB-FreigabeorMB-

Approval331.0.

Information aboutapproved brake fluid can be

obtainedatany qualified specialist workshopor

on the Internetat

http://bevo.mercedes-benz.com.

Have the brake fluid regularly replaced at a

qualified specialist workshop in accordance

with the replacement intervals and the

replacement confirmed in the Maintenance

Booklet.

Coolant

Importantsafety notes

WARNING

If antifreeze comes into contact with hot com-

ponents in the engine compartment, it may

ignite. There is arisk of fire and injury.

Let the engine cool downbefore youadd anti-

freeze.Make surethat antifreeze is not spilled

next to the filler neck. Thoroughly cleanthe

antifreeze from components before starting

the engine.

Only addcoolant that has beenpremixed

with the desiredantifreeze protection. You

couldotherwise damagethe engine.

Furtherinformationoncoolants can be found

in the Mercedes-Benz Specifications for Ser-

vice Products, MB BeVo 310.1, e.g. on the

Internet at http://bevo.mercedes-benz.com.

Or contact aqualifiedspecialist workshop.

Always use asuitablecoolant mixture, even

in countries where hightemperatures prevail.

Otherwise,the engine cooling system is not

sufficiently protected from corrosion and

overheating.

Have the coolant regularly replaced at a

qualified specialist workshop and the replace-

ment confirmed in the Maintenance Booklet.

Comply with the important safety notes for ser-

vice products whenhandling coolant

(

Y page 344).

The coolant is amixture of water and anti-

freeze/corrosion inhibitor. It performs the fol-

lowing tasks:

Anti-corrosion protection

Antifreeze protection

Raising the boiling point

If the coolant has antifreeze protection downto

-35 ‡(-37†), the boiling point of the coolant

during operation is approximately266 ‡

(130 †).

Service products and filling capacities

347

Technical data

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mercedes C-Class Coupe 2017 Seite 349

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info