Bedienungsanleitung Mercedes CLA 2015 (Seite 295 von 362) (Englisch)

624684

295

Zoom out

Zoom in

Vorherige Seite

1/362

Nächste Seite

Use plenty of water and rinse out the

sponge frequently.

Rinse the vehicle with clean water and dry

thoroughly with a chamois.

Do not let the cleaning agent dry on the

paintwork.

Carefully remove all deposits of road salt as

soon as possible when driving in winter.

Power washers

WARNING

The water jet from a circular jet nozzle (dirt

blasters) can cause invisible exterior damage

to the tires or chassis components. Compo-

nents damaged in this way may fail unexpect-

edly. There is a risk of an accident.

Do not use power washers with circular jet

nozzles to clean the vehicle. Have damaged

tires or chassis components replaced imme-

diately.

Always maintain a distance of at least

11.8 in (30 cm) between the vehicle and the

power washer nozzle. Information about

the correct distance is available from the

equipment manufacturer.

Move the power washer nozzle around

when cleaning your vehicle.

Do not aim directly at any of the following:

tires

door gaps, roof gaps, joints, etc.

electrical components

battery

connectors

lights

seals

trim

ventilation slots

Damaged seals or electrical components

can lead to leaks or failures.

Edition 1 special model: parts of your

vehicle are covered with a decorative foil.

Maintain a distance of at least 70 cm

between the foil-wrapped parts of the vehi-

cle and the nozzle of the power washer.

Information about the correct distance is

available from the equipment manufac-

turer.

Move the power washer nozzle around

when cleaning your vehicle.

Cleaning the paintwork

Do not affix:

stickers

films

magnetic plates or similar items

to painted surfaces. You could otherwise

damage the paintwork.

Scratches, corrosive deposits, areas affected

by corrosion and damage caused by inade-

quate care cannot always be completely

repaired. In such cases, visit a qualified spe-

cialist workshop.

Remove dirt immediately, where possible,

while avoiding rubbing too hard.

Soak insect remains with insect remover

and rinse off the treated areas afterwards.

Soak bird droppings with water and rinse

off the treated areas afterwards.

Remove coolant, brake fluid, tree resin,

oils, fuels and greases by rubbing gently

with a cloth soaked in petroleum ether or

lighter fluid.

Use tar remover to remove tar stains.

Use silicone remover to remove wax.

If water no longer forms "beads" on the paint

surface, use the paint care products recom-

mended and approved by Mercedes-Benz.

This is the case approximately every three to

five months, depending on the climate con-

ditions and the care product used.

If dirt has penetrated the paint surface or if

the paint has become dull, the paint cleaner

recommended and approved by Mercedes-

Benz should be used.

Care

293

Maintenance and care

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mercedes CLA 2015 Seite 295

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info