Bedienungsanleitung Mercedes CLA 2018 (Seite 320 von 326) (Englisch)

703614

320

Zoom out

Zoom in

Vorherige Seite

1/326

Nächste Seite

Model MB-Freigabe or

MB-Approval

All models

229.5

Use only SAE 0W-40 or SAE 5W-40 engine oils

for Mercedes-AMG vehicles.

MB approval is indicated on the oil contain-

ers.

Fillingcapacities

The following values refer to an engine oil

change, including the oil filter.

Model Capacity

Mercedes‑AMGvehicles

5.8 US qt (5.5 l)

All other models

5.9 US qt (5.6 l)

Additives

Do not use any additives in the engine oil.

This could damage the engine.

Brake fluid

WARNING

The brake fluidconstantly absorbs moisture

from the air. This lowers the boiling point of

the brake fluid. If the boiling point of the brake

fluidistoo low,vaporpockets may form in the

brake system when the brakes are applied

hard. This would impair braking efficiency.

There is arisk of an accident.

You should have the brake fluidrenewedat

the specified intervals.

When handling brake fluid, observe the impor-

tant safety notes on service products

(

Y page315).

The brake fluidchange intervalscan be found in

the Maintenance Booklet.

Only use brake fluidapproved by Mercedes-

Benz in accordance with MB-Freigabe or MB-

Approval331.0.

Information about approved brake fluidcan be

obtained at any qualified specialist workshop or

on the Internet at

http://bevo.mercedes-benz.com.

Have the brake fluidregularlyreplaced at a

qualified specialist workshop and the replace-

ment confirmed in the Maintenance Booklet.

Coolant

Important safety notes

WARNING

If antifreeze comes into contact with hot com-

ponents in the engine compartment, it may

ignite. There is arisk of fire and injury.

Let the engine cool down before you add anti-

freeze. Make sure that antifreeze is not spilled

next to the filler neck. Thoroughly cleanthe

antifreeze from components before starting

the engine.

Only add coolant that has been premixed

with the desired antifreeze protection. You

couldotherwise damage the engine.

Further information on coolants can be found

in the Mercedes-Benz Specifications for Ser-

vice Products, MB BeVo 310.1, e.g. on the

Internet at http://bevo.mercedes-benz.com.

Or contact aqualified specialist workshop.

Always use asuitable coolant mixture, even

in countries where high temperatures prevail.

Otherwise, the engine cooling system is not

sufficiently protected from corrosionand

overheating.

Have the coolant regularlyreplaced at a

qualified specialist workshop and the replace-

ment confirmed in the Maintenance Booklet.

Comply with the important safety precautions

for service products when handling coolant

(

Y page315).

The coolant is amixture of water and corrosion

inhibitor/antifreeze concentrate. It performs

the following tasks:

Anti-corrosion protection

Antifreeze protection

Raising the boiling point

If the coolant has antifreeze protection down to

-35 ‡(-37 †), the boiling point of the coolant

during operation is approximately266 ‡

(130 †).

318

Serviceproducts and filling capacities

Technical data

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mercedes CLA 2018 Seite 320

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Mercedes CLA 2018

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info