DeactivDeactivating tating the special seat belt rehe special seat belt retrtractactoror
#Press therelease button of the seat belt
buckle.
#Hold the seat belt tongue and guide back to
the seat belt outlet.
InstInstalling a LATCalling a LATCH-type (ISOFIX) cH-type (ISOFIX) child rhild resestrtraintaint
systsystem on tem on thehe lele and rand right right rear seatsear seats
InstInstalling a LATCalling a LATCH-type (ISOFIX) cH-type (ISOFIX) child rhild resestrtraintaint
systsystem on tem on thehe lele and rand right right rear seatsear seats
&WWARNINGARNING Risk of accident if therear
bench seat, rear seat and seat backrest
are not engaged
The rear bench seat, rear seat and seat back-
rest mayfold forwards, even when you are
driving.
RAs a result, thevehicle occupant will be
pushed into the seat belt with increased
force. The seat belt will not be able to pro-
tect as intended and could cause addi-
tional injury.
RObjects or loads in the trunk or cargo
compartment will not be restrained by the
seat backrest.
#Make sure that therear bench seat, the
rear seat and the seat backrest are
engaged before every trip.
If the le and right seat backrests are not
engaged and locked in place, this will be shown
on the display on the instrument cluster.
If the center seat backrest is not engaged and
locked in place, thered lock verication indicator
will be visible.
&WWARNINGARNING Risk of injury or death if the
permissible gross mass of thechild and
child restraint system together is excee-
ded.
Too much load may be placed on theLATCH-
type (ISOFIX) child restraint system and the
child may not be restrained correctly in the
event of an accident, forexample.
#If thechild and thechild restraint system
together weigh more than the permissi-
ble gross mass of 73 lb (33 kg ), only use
aLATCH-type (ISOFIX) child restraint
system with which thechild is secured
with thevehicle seat belt.
#Also secure thechild restraint system
with theTopTether belt, if available.
Always comply with the information about the
mass of thechild restraint system:
RIn the manufacturer's installation and operat-
ing instructions forthechild restraint system
used
ROn a label on thechild restraint system, if
present
Regularlycheck that the permissible gross mass
of thechild and child restraint system is still com-
plied with.
When installing a child restraint system, observe
thefollowing:
OAlways observe the correct use of the seats
and consider their suitability for attaching a
child restraint system.
Occupant safety 5757
