Bedienungsanleitung Mercedes E-Class Sedan 2016 (Seite 299 von 350) (Englisch)

624587

299

Zoom out

Zoom in

Vorherige Seite

1/350

Nächste Seite

and must be corrected at the next oppor-

tunity.

If the Check Tires message appears in the

multifunction display, the tire pressure in

one or more tires has dropped significantly

and the tires must be checked.

If the Warning Tire Malfunction mes-

sage appears in the multifunction display,

the tire pressure in one or more tires has

dropped suddenly and the tires must be

checked.

Observe the instructions and safety notes in

the display messages in the "Tires" section

(

Y page 200).

If the wheel positions on the vehicle are rota-

ted, the tire pressures may be displayed for

the wrong positions for a short time. This is

rectified after a few minutes of driving, and

the tire pressures are displayed for the cor-

rect positions.

Restarting the tire pressure monitor

When you restart the tire pressure monitor, all

existing warning messages are deleted and

the warning lamps go out. The monitor uses

the currently set tire pressures as the refer-

ence values for monitoring. In most cases, the

tire pressure monitor will automatically

detect the new reference values after you

have changed the tire pressure. However, you

can also define reference values manually as

described here. The tire pressure monitor

then monitors the new tire pressure values.

Set the tire pressure to the value recom-

mended for the corresponding driving sit-

uation on the Tire and Loading Information

placard on the driver's side

B-pillar (

Y page 291).

Additional tire pressure values for different

loads can also be found on the tire pressure

table on the inside of the fuel filler flap

(

Y page 291).

Make sure that the tire pressure is correct

on all four wheels.

Make sure that the SmartKey is in position

2 in the ignition lock.

Press the = or ; button on the steer-

ing wheel to select the Service

menu.

Press the 9 or : button to select

Tire Pressure

Press the a button.

The multifunction display shows the cur-

rent tire pressure for the individual tires or

the Tire

pressure will be displayed

after driving a few minutes mes-

sage.

Press the : button.

The Use Current Pressures as New

Reference Values message appears in

the multifunction display.

If you wish to confirm the restart:

Press the a button.

The Tire Press. Monitor Restarted

message appears in the multifunction dis-

play.

After driving for a few minutes, the system

checks whether the current tire pressures

are within the specified range. The new tire

pressures are then accepted as reference

values and monitored.

If you wish to cancel the restart:

Press the % button.

The tire pressure values stored at the last

restart will continue to be monitored.

Radio type approval for the tire pres-

sure monitor

In certain countries, a radio type approval for

the tire pressure monitor may be required.

The radio type approval number for the tire

pressure monitor can be found in the "Wheels

and tires" section of the Digital Operator's

Manual.

Tire pressure

297

Wheels and tires

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mercedes E-Class Sedan 2016 Seite 299

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info