Bedienungsanleitung Mercedes G-Class 2015 (Seite 345 von 350) (Englisch)

624699

345

Zoom out

Zoom in

Vorherige Seite

1/350

Nächste Seite

The coolant is a mixture of water and anti-

freeze/corrosion inhibitor. It performs the

following tasks:

corrosion protection

antifreeze protection

raising the boiling point

If the coolant has antifreeze protection down

to -35 ‡(-37 †), the boiling point of the cool-

ant in the pressurized system is approx-

imately 266 ‡ (130 †).

The antifreeze/corrosion inhibitor concentra-

tion in the engine cooling system should:

be at least 50%. This will protect the engine

cooling system against freezing down to

approximately -35 ‡ (-37 †).

not exceed 55% (antifreeze protection

down to -49 ‡ [-45 †]). Otherwise, heat

will not be dissipated as effectively.

Mercedes-Benz recommends an antifreeze/

corrosion inhibitor in accordance with MB

Specifications for Service Products 310.1.

When the vehicle is first delivered, it is fil-

led with a coolant mixture that ensures

adequate antifreeze and corrosion protec-

tion.

The coolant is checked with every main-

tenance interval at a qualified specialist

workshop.

The engine cooling system is filled with cool-

ant at the factory which contains antifreeze/

corrosion inhibitor that ensures protection

down to approximately -35 ‡ (-37 †).

Your vehicle has a range of aluminum com-

ponents. Aluminum components in the

engine make it necessary to use antifreeze/

corrosion inhibitor that has been specifically

formulated to protect the aluminum parts.

Failure to use such anticorrosion/antifreeze

coolant will result in a significantly shortened

service life.

The coolant must be used throughout the year

in order to maintain the necessary corrosion

protection and to provide protection from

overheating. In the Maintenance Booklet, you

can find information on the intervals for

renewal.

The renewal interval is determined by the

coolant type and the engine cooling system

design. The renewal interval in the Mainte-

nance Booklet is only valid if the coolant is

renewed or added to with Mercedes-Benz

approved products. Therefore, only use MB

326.0 antifreeze/corrosion inhibitor or

another Mercedes-Benz approved product of

the same specification.

Information on other products with the same

specifications that are approved by

Mercedes-Benz can be obtained at an author-

ized Mercedes-Benz Center or on the Internet

at http://bevo.mercedes-benz.com.

If the coolant level is too low, MB 325.0 anti-

freeze/corrosion inhibitor should be added.

Have the engine cooling system checked for

possible leaks.

Capacity

Model Capacity

G 550

Approx. 11.1 US qt

(10.5 l)

G 63 AMG

Approx. 14.6 US qt

(13.8 l)

Low-temperature

circuit: approx-

imately 3.1 US qt

(2.9 l)

Use MB 325.0 or MB 326.0 antifreeze/

corrosion inhibitor.

Windshield/headlamp cleaning sys-

tem

Important safety notes

WARNING

Windshield washer concentrate could ignite if

it comes into contact with hot engine compo-

Service products and filling capacities

343

Technical data

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mercedes G-Class 2015 Seite 345

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info