Bedienungsanleitung Mercedes G-Class 2017 (Seite 49 von 198) (Englisch)

703607

Zoom out

Zoom in

Vorherige Seite

1/198

Nächste Seite

Massage the entire back, rising waves, sooth-

ing downward movements

Activating Massage

Mobilizing massage and rising and descend-

ing dynamic waves

Classic Massage

Single and twin waves moving upwards

across the entire back

Mobilizing Massage

Mobilization via stronger single and twin

waves moving upwards across the entire back

Selecting a massage program

Call up the seat functions (Y page 46).

To select Massage: turn and press the con-

troller.

To select a seat: slide 1 the controller.

To select massage programs: turn and press

the controller.

The massage program runs for approximately

15 to 25 minutes, depending on the setting.

To exit the menu: press the % button.

Seat heating balance

The balance function controls the distribution of

heat for the seat backrest and seat cushion.

The balance function influences the currently

set heating level of the seat heating (see the

vehicle Operator's Manual).

Call up the seat functions (Y page 46).

To select Seat Heating Balance: turn and

press the controller.

To select a seat: slide 1 the controller.

To change the setting: turn the controller.

You will see the changes you have made in the

settings display.

The settings represent the following:

0 — the backrest and seat cushion are evenly

heated according to the setting selected with

the seat heating button.

1 to 3 increasing — the heat output to the seat

cushion is reduced one level at a time.

1 to 3 decreasing — the heat output for the

backrest is reduced one level at a time.

To exit the menu: press the % button.

Resetting all adjustments

Call up the seat functions (Y page 46).

Select a seat.

To select Reset: turn and press the controller.

To select a seat: slide 1 the controller.

To reset: press the controller.

A prompt appears.

To select Yes or No: turn and press the con-

troller.

If you select No

the process is canceled.

After selecting Yes

all seat adjustments are

reset to the default values (factory setting).

360° camera

General notes

The 360° camera covers the immediate sur-

roundings of the vehicle and assists you, for

instance when parking or at exits with reduced

visibility.

The 360° camera is only an aid. It is not a

replacement for your attention to your immedi-

ate surroundings. You are always responsible

for safe maneuvering and parking. Make sure

that no persons or animals are in the maneu-

vering range.

Further information on the 360°camera can be

found in the vehicle Operator's Manual.

Displaying the 360° camera image

The 360° camera image can be displayed if:

your vehicle is equipped with a 360° camera

the 360° Camera function is switched on (see

the vehicle Operator's Manual)

Press Vehicle in the main function bar.

The vehicle menu is displayed.

Select 360° Camera.

The 360° camera image appears in split-

screen mode.

You will see the previous view on the display if,

when the function is switched on:

you turn the SmartKey to position 1 in the

ignition lock

you select transmission position P

when you are driving at moderate speeds

360° camera

Vehicle functions

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mercedes G-Class 2017 Seite 49

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Mercedes G-Class 2017

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info