Bedienungsanleitung Mercedes GLA 2019 (Seite 339 von 346) (Englisch)

703635

339

Zoom out

Zoom in

Vorherige Seite

1/346

Nächste Seite

For a list of approved engine oils and oil filters,

consult an authorized Mercedes-Benz Center.

Or visit the website

http://bevo.mercedes-benz.com.

The table shows which engine oils have been

approved for your vehicle.

Model MB-Freigabe or

MB-Approval

All models

229.5

Use only SAE 0W-40 or SAE 5W-40 engine oils

for Mercedes-AMG vehicles.

MB approval is indicated on the oil con-

tainers.

Filling capacities

The following values refer to an engine oil

change, including the oil filter.

Model Capacity

Mercedes‑AMG vehicles

5.8 USqt (5.5 l)

All other models

5.9 USqt (5.6 l)

Additives

Do not use any additives in the engine oil.

This could damage the engine.

Brake fluid

WARNING

The brake fluid constantly absorbs moisture

from the air. This lowers the boiling point of

the brake fluid. If the boiling point of the

brake fluid is too low, vapor pockets may

form in the brake system when the brakes

are applied hard. This would impair braking

efficiency. There is a risk of an accident.

You should have the brake fluid renewed at

the specified intervals.

When handling brake fluid, observe the impor-

tant safety notes on service products

(Y page 334).

The brake fluid change intervals can be found

in the Maintenance Booklet.

Only use brake fluid approved by Mercedes-

Benz in accordance with MB-Freigabe or MB-

Approval 331.0.

Information about approved brake fluid can be

obtained at any qualified specialist workshop

or on the Internet at

http://bevo.mercedes-benz.com.

Have the brake fluid regularly replaced at a

qualified specialist workshop and the

replacement confirmed in the Maintenance

Booklet.

Coolant

Important safety notes

WARNING

If antifreeze comes into contact with hot

components in the engine compartment, it

may ignite. There is a risk of fire and injury.

Let the engine cool down before you add

antifreeze. Make sure that antifreeze is not

spilled next to the filler neck. Thoroughly

clean the antifreeze from components

before starting the engine.

Only add coolant that has been premixed

with the desired antifreeze protection. You

could otherwise damage the engine.

You can find additional notes on the coolant

in the following places:

in the Mercedes-Benz Specifications for

Service Products, MB BeVo 310.1

on the Internet at

http://bevo.mercedes-benz.com

on the Mercedes-Benz BeVo app

a qualified specialized workshop

Always use a suitable coolant mixture,

even in countries where high temperatures

prevail.

Otherwise, the engine cooling system is not

sufficiently protected from corrosion and

overheating.

Have the coolant regularly replaced at a

qualified specialist workshop and the

replacement confirmed in the Maintenance

Booklet.

Service products and filling capacities

337

Technical data

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mercedes GLA 2019 Seite 339

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info