Bedienungsanleitung Mercedes GLC 2017 (Seite 334 von 374) (Englisch)

703603

334

Zoom out

Zoom in

Vorherige Seite

1/374

Nächste Seite

Remove the towing eye from the retainer

(

Y page 320).

Mercedes-AMG vehicles: use a suitable

object, e.g. a screwdriver, to pry off cover :

on the front bumper from underneath. Take

the cover from the opening, but do not

remove it.

Press the mark on cover : on the rear

bumper inward and remove.

All other vehicles: press the mark on

cover : inward and remove.

Screw in the towing eye clockwise as far as it

will go and tighten it.

Vehicles with a trailer tow hitch do not have a

bracket for the screw-in towing eye at the back.

Connect the towbar to the trailer tow hitch

(

Y page 204).

Removing the towing eye

Unscrew and remove the towing eye.

Attach cover : to the bumper and press until

it engages.

Towing a vehicle with both axles on

the ground

The automatic transmission automatically shifts

to position j when you open the driver's or

front-passenger door or when you remove the

SmartKey from the ignition lock. It is essential to

observe the following steps to ensure that the

automatic transmission remains in position i

during towing.

Make sure that the vehicle is stationary.

Turn the SmartKey to position 2 in the igni-

tion lock.

Depress and hold the brake pedal.

Shift the automatic transmission to position

Leave the SmartKey in position 2 in the igni-

tion lock.

Release the brake pedal.

Release the electric parking brake.

Switch on the hazard warning lamps

(

Y page 113).

In order to signal a change of direction when

towing the vehicle with the hazard warning

lamps switched on, use the combination switch

as usual. In this case, only the indicator lamps

for the direction of travel flash. After resetting

the combination switch, the hazard warning

lamp starts flashing again.

Transporting the vehicle

General notes

When the vehicle is loaded for transport, the

front and rear axles must be stationary and on

the same transportation vehicle. Positioning

over the connection point of the transport

vehicle is not permitted. The drive train may

otherwise be damaged.

You may only secure the vehicle by the

wheels, not by parts of the vehicle such as

axle or steering components. Otherwise, the

vehicle could be damaged.

The towing eye or trailer tow hitch can be used

to pull the vehicle onto a trailer or transporter if

you wish to transport it.

Turn the SmartKey to position 2 in the igni-

tion lock.

Shift the automatic transmission to position

As soon as the vehicle has been loaded:

Prevent the vehicle from rolling away by

applying the electric parking brake.

Shift the automatic transmission to position

Turn the SmartKey to position u in the igni-

tion lock and remove it.

Secure the vehicle.

332

Towing and tow-starting

Breakdown assistance

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mercedes GLC 2017 Seite 334

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Mercedes GLC 2017

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info