Bedienungsanleitung Mercedes GLE 2017 (Seite 361 von 390) (Englisch)

703604

361

Zoom out

Zoom in

Vorherige Seite

1/390

Nächste Seite

requirements of the U.S. Department of Trans-

portation.

Manufacturer identification code: manufac-

turer identification code ; provides details on

the tire manufacturer. New tires have a code

with two symbols. Retreaded tires have a code

with four symbols.

For further information about retreaded tires,

see (

Y page 366).

Tire size: identifier = describes the tire size.

Tire type code: tire type code ? can be used by

the manufacturer as a code to describe specific

characteristics of the tire.

Date of manufacture: date of manufacture A

provides information about the age of a tire. The

first and second positions represent the week of

manufacture, starting with "01" for the first cal-

endar week. Positions three and four represent

the year of manufacture. For example, a tire that

is marked "3214" was manufactured in week 32

in 2014.

Tire data is vehicle-specific and may deviate

from the data in the example.

Tire characteristics

This information describes the type of tire cord

and the number of layers in sidewall : and

under tire tread ;.

Tire data is vehicle-specific and may deviate

from the data in the example.

Definition of terms for tires and loading

Tire ply composition and material used

Describes the number of plies or the number of

layers of rubber-coated fabric in the tire tread

and sidewall. These are made of steel, nylon,

polyester and other materials.

Bar

Metric unit for tire pressure. 14.5038 pounds

per square inch (psi) and 100 kilopascals (kPa)

are the equivalent of 1 bar.

DOT (Department of Transportation)

DOT-marked tires fulfill the requirements of the

U S Department of Transportation.

Normal occupant weight

The number of occupants for which the vehicle

is designed multiplied by 68 kilograms (150 lbs).

Uniform Tire Quality Grading Standards

A uniform standard to grade the quality of tires

with regards to tread quality, tire traction and

temperature characteristics. The quality grad-

ing assessment is made by the manufacturer

following specifications from the U.S. govern-

ment. The ratings are molded into the sidewall of

the tire.

Recommended tire pressures

The recommended tire pressure applies to the

tires mounted at the factory.

The Tire and Loading Information placard con-

tains the recommended tire pressures for cold

tires on a fully loaded vehicle and for the maxi-

mum permissible vehicle speed.

The tire pressure table contains the recommen-

ded pressures for cold tires for various operat-

ing conditions, i.e. differing load and speed con-

ditions.

Increased vehicle weight due to optional

equipment

The combined weight of all standard and

optional equipment available for the vehicle,

regardless of whether it is actually installed on

the vehicle or not.

Rim

This is the part of the wheel on which the tire is

mounted.

GAWR (Gross Axle Weight Rating)

The GAWR is the maximum gross axle weight

rating. The actual load on an axle must never

exceed the gross axle weight rating. The gross

axle weight rating can be found on the vehicle

identification plate on the B-pillar

on the dri

ver's

side.

All about wheels and tires

359

Wheels and tires

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mercedes GLE 2017 Seite 361

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Mercedes GLE 2017

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info