Bedienungsanleitung Mercedes GLE Coupe 2016 (Seite 365 von 382) (Englisch)

624639

365

Zoom out

Zoom in

Vorherige Seite

1/382

Nächste Seite

Inflating the collapsible spare wheel

(Mercedes-AMG GLE 63)

Inflate the collapsible spare wheel using the

tire inflation compressor before lowering the

vehicle. The wheel rim could otherwise be

damaged.

Do not operate the tire inflation compressor

for longer than eight minutes at a time without

a break. It may otherwise overheat.

The tire inflation compressor can be operated

again once it has cooled down.

Comply with the manufacturer's safety instruc-

tions on the tire inflation compressor label and

on the tire sealant bottle.

Mount the collapsible spare wheel as descri-

bed (

Y page 352).

The collapsible spare wheel must be mounted

before it is inflated.

Remove the tire inflation compressor from

the stowage space under the trunk floor

(

Y page 315).

Pull connector ? and hose B out of the

housing.

Remove the cap from the valve on the col-

lapsible spare wheel.

Screw union nut ; of hose B onto the valve.

Make sure on/off switch A of the tire infla-

tion compressor is set to 0.

Insert connector ? into the socket in the

center console in the rear compartment or in

the socket in the cargo compartment.

Socket in the rear compartment:

(

Y page 289)

Socket in the cargo compartment:

(

Y page 289)

Only operate the tire inflation compressor

using the socket in the rear compartment or

in the cargo compartment, even if the ignition

is turned off.

An emergency cut-out ensures that the on-

board voltage does not drop too low. If the on-

board voltage is too low, the power to the

sockets is automatically cut. This ensures

that there is sufficient power to start the

engine.

Observe the further information on sockets

(

Y page 289).

Turn the SmartKey to position 1 in the ignition

lock (

Y page 134).

Press on and off switch A on the tire inflation

compressor to I.

The tire inflation compressor is switched on.

The tire i

s inflated. The tire pressure is shown

on pressure gauge =.

Inflate the tire to the specified tire pressure.

The specified tire pressure is printed on the

yellow label of the emergency spare wheel.

When the specified tire pressure has been

reached, press on and off switch A on the

tire inflation compressor to 0.

The tire inflation compressor is switched off.

Turn the SmartKey to position 0 in the ignition

lock.

If the tire pressure is higher than the specified

pressure, press pressure release valve but-

ton : until the correct tire pressure has been

reached.

Unscrew union nut ; on hose B from the

valve.

Screw the cap onto the valve of the collapsi-

ble spare wheel again.

Stow connector ? and hose B in the lower

section of the tire inflation compressor.

Stow the tire inflation compressor in the vehi-

cle.

Emergency spare wheel

363

Wheels and tires

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mercedes GLE Coupe 2016 Seite 365

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info