Bedienungsanleitung Mercedes GLE Coupe 2016 (Seite 374 von 382) (Englisch)

624639

374

Zoom out

Zoom in

Vorherige Seite

1/382

Nächste Seite

Coolant

Important safety notes

WARNING

If antifreeze comes into contact with hot com-

ponents in the engine compartment, it may

ignite. There is a risk of fire and injury.

Let the engine cool down before you add anti-

freeze. Make sure that antifreeze is not spilled

next to the filler neck. Thoroughly clean the

antifreeze from components before starting

the engine.

Only add coolant that has been premixed

with the desired antifreeze protection. You

could otherwise damage the engine.

Further information on coolants can be found

in the Mercedes-Benz Specifications for Ser-

vice Products, MB BeVo 310.1, e.g. on the

Internet at http://bevo.mercedes-benz.com.

Or contact a qualified specialist workshop.

Always use a suitable coolant mixture, even

in countries where high temperatures prevail.

Otherwise, the engine cooling system is not

sufficiently protected from corrosion and

overheating.

Have the coolant regularly replaced at a

qualified specialist workshop and the replace-

ment confirmed in the Maintenance Booklet.

Comply with the important safety precautions

for service products when handling coolant

(

Y page 367).

The coolant is a mixture of water and anti-

freeze/corrosion inhibitor. It performs the fol-

lowin

g t

asks:

corrosion protection

antifreeze protection

raising the boiling point

If the coolant has antifreeze protection down to

-35 ‡ (-37 †), the boiling point of the coolant

during operation is approximately 266 ‡

(130 †).

The antifreeze concentrate/corrosion inhibitor

concentration in the engine cooling system

should:

be at least 50%. This will protect the engine

cooling system against freezing down to

approximately -35 ‡ (-37 †).

not exceed 55% (antifreeze protection down

to -49 ‡ [-45 †]). Otherwise, heat will not be

dissipated as effectively.

Mercedes-Benz recommends an antifreeze/

corrosion inhibitor concentrate in accordance

with MB Specifications for Service Products

310.1.

When the vehicle is first delivered, it is filled

with a coolant mixture that ensures adequate

antifreeze and corrosion protection.

The coolant is checked with every mainte-

nance interval at a qualified specialist work-

shop.

Filling capacities

Model Capacity

Mercedes‑AMG

vehicles

Approx. 12.5 US qt

(11.8 l)

GLE 350 d 4MATIC

Coupe

Approx. 12.2 US qt

(11.5 l)

All other models

Approx. 10.3 US qt

(9.7 l)

Windshield washer system

Important safety notes

WARNING

Windshield washer concentrate could ignite if

it comes into contact with hot engine compo-

nents or the exhaust system. There is a risk of

fire and injury.

Make sure that no windshield washer con-

centrate is spilled next to the filler neck.

Only MB SummerFit and MB WinterFit

washer fluid should be mixed together. The

spray nozzles may otherwise become

blocked.

372

Service products and filling capacities

Technical data

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mercedes GLE Coupe 2016 Seite 374

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info