Bedienungsanleitung Mercedes GLS 2017 (Seite 358 von 390) (Englisch)

703606

358

Zoom out

Zoom in

Vorherige Seite

1/390

Nächste Seite

You can find more tire pressure values for

various operating conditions in the tire pres-

sure table inside the fuel filler flap

(

Y page 349).

Make sure that the tire pressure is correct on

all four wheels.

Make sure that the SmartKey is in position 2

in the ignition lock.

Press the = or ; button on the steering

wheel to select the Serv.

menu.

Press the 9 or : button to select

Tire Pressure

Press the a button.

The multifunction display shows the current

tire pressure for the individual tires or the

Tire pressure will be displayed

after driving a few minutes message.

Press the : button.

The Use

Current Pressures as New Ref‐

erence Values message appears in the mul-

tifunction display.

If you wish to confirm the restart:

Press the a button.

The Tire

Press. Monitor Restarted mes-

sage appears in the multifunction display.

After driving for a few minutes, the system

checks whether the current tire pressures are

within the specified range. The new tire pres-

sures are then accepted as reference values

and monitored.

If you wish to cancel the restart:

Press the % button.

The tire pressure values stored at the last

restart will continue to be monitored.

Radio type approval for the tire pres-

sure monitor

Country Radio type approval number

USA FCC ID: MRXMW2433A

FCC ID: MRXGG4

FCC ID: MRXMC34MA4

Canada IC: 2546A-MW2433A

IC: 2546A-GG4

IC: 2546A-MC34MA4

Loading the vehicle

Instruction labels for tires and loads

WARNING

Overloaded tires can overheat, causing a

blowout. Overloaded tires can also impair the

steering and driving characteristics and lead

to brake failure. There is a risk of accident.

Observe the load rating of the tires. The load

rating must be at least half of the GAWR of

your vehicle. Never overload the tires by

exceeding the maximum load.

Two instruction labels on your vehicle show the

maximum possible load.

(1) The Tire and Loading Information placard is

on the B-pillar on the driver's side. The Tire

and Loading Information placard shows the

maximum permissible number of occu-

pants and the maximum permissible vehicle

load. It also contains details of the tire sizes

and corresponding pressures for tires

mounted at the factory.

(2) The vehicle identification plate is on the B-

pillar on the driver's side. The vehicle iden-

tification plate informs you of the gross

vehicle weight rating. It is made up of the

vehicle weight, all vehicle occupants, the

fuel and the cargo. You can also find infor-

mation about the maximum gross axle

weight rating on the front and rear axle.

The maximum gross axle weight rating is

the maximum weight that can be carried by

one axle (front or rear axle). Never exceed

the maximum load or the maximum gross

axle weight rating for the front or rear axle.

356

Loading the vehicle

Wheels and tires

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mercedes GLS 2017 Seite 358

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Mercedes GLS 2017

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info