Bedienungsanleitung Mercedes GLS 2018 (Seite 118 von 398) (Englisch)

703622

118

Zoom out

Zoom in

Vorherige Seite

1/398

Nächste Seite

The daytime running lamps improve the visibility

of your vehicle during the day. To do this, the

daytime running lamps function must be

switched on using the on-board computer

(

Y page 243).

If the engine is running and you turn the light

switch to T or L, the manual settings

take precedence over the daytime running

lamps.

Low-beam headlamps

Even if the light sensor does not detect that it is

dark, the parking lamps and low-beam head-

lamps switch on when the ignition is switched on

and the light switch is set to the L position.

This is a particularly useful function in the event

of rain and fog.

To switch on the low-beam headlamps:

turn the SmartKey to position 2 in the igni-

tion lock or start the engine.

Turn the light switch to L.

The green L indicator lamp in the instru-

ment cluster lights up.

Rear fog lamp

The rear fog lamp improves visibility of your

vehicle for the traffic behind in the event of thick

fog. Please take note of the country-specific

regulations for the use of rear fog lamps.

To switch on the rear fog lamp: turn the

SmartKey to position 2 in the ignition lock or

start the engine.

Turn the light switch to L or c.

Press the R button.

The yellow R indicator lamp in the instru-

ment cluster lights up.

To switch off the rear fog lamp: press the

R button.

The yellow R indicator lamp in the instru-

ment cluster goes out.

Parking lamps

If the battery charge is very low, the parking

lamps or standing lamps are automatically

switched off to enable the next engine start.

Always park your vehicle safely and in a well lit

area, in accordance with the relevant legal

stipulations. Avoid using the T parking

lamps over a period of several hours. If pos-

sible, switch on the right-hand X or left-

hand W standing lamps.

To switch on: turn the light switch to T.

The green T indicator lamp in the instru-

ment cluster lights up.

Standing lamps

Switching on the standing lamps ensures the

corresponding side of t

he vehicle is illuminated.

To switch on the standing lamps: the

SmartKey should not be in the ignition lock or

in key position u in the ignition lock.

Turn the light switch to W (left-hand side of

the vehicle) or X (right-hand side of the

vehicle).

Vehicles towing a trailer: both the right-hand

and left-hand standing lamps (tail lamps) are

always illuminated on the trailer.

Combination switch

High-beam headlamps

;

Turn signal, right

High-beam flasher

Turn signal, left

To indicate briefly: press the combination

switch briefly to the pressure point in the

direction of arrow ; or ?.

The corresponding turn signal flashes three

times.

To indicate: press the combination switch

beyond the pressure point in the direction of

arrow ; or ?.

To switch on the high-beam headlamps:

turn the light switch to L or Ã.

Press the combination switch beyond the

pressure point in the direction of arrow :.

In the Ã position, the high-beam head-

lamps are only switched on when it is dark and

the engine is running.

116

Exterior lighting

Lights and windshield wipers

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mercedes GLS 2018 Seite 118

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Mercedes GLS 2018

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info