Bedienungsanleitung Mercedes GLS 2018 (Seite 377 von 398) (Englisch)

703622

377

Zoom out

Zoom in

Vorherige Seite

1/398

Nächste Seite

be required earlier. Do not change the direction

of wheel rotation.

Clean the contact surfaces of the wheel and the

brake disc thoroughly every time a wheel is rota-

ted. Check the tire pressure and, if necessary,

restart the tire pressure loss warning system or

the tire pressure monitor (

Y page 361).

Direction of rotation

Tires with a specified direction of rotation have

additional benefits, e.g. if there is a risk of hydro-

planing. These advantages can only be gained if

the tires are installed corresponding to the

direction of rotation.

An arrow on the sidewall of the tire indicates its

correct direction of rotation.

Storing wheels

Store wheels that are not being used in a cool,

dry and preferably dark place. Protect the tires

from oil, grease, gasoline and diesel.

Mounting a wheel

Preparing the vehicle

Vehicle with emergency spare wheel:

when mounting the emergency spare wheel in

the event of a flat tire, follow the additional

notes on vehicle preparation under "Flat tire"

(

Y page 339).

Stop the vehicle on solid, non-slippery and

level ground.

Apply the electric parking brake manually.

Bring the front wheels into the straight-ahead

position.

Vehicles with automatic transmission:

shift the transmission to position j.

Vehicles with the AIRMATIC package:

make sure that the normal vehicle level is

selected (

Y page 190).

Vehicles with the Off-Road Engineering

package: make sure that the normal level is

selected (

Y page 184).

Switch off the engine.

Vehicles without KEYLESS-GO: remove the

SmartKey from the ignition lock.

Vehicles with KEYLESS-GO: open the driv-

er's door.

The vehicle electronics are now in position

u. This means no SmartKey is in the ignition

lock.

Vehicles with KEYLESS-GO: remove the

Start/Stop button from the ignition lock

(

Y page 140).

If included in the vehicle equipment, remove

the tire-change tool kit from the vehicle.

Safeguard the vehicle against rolling away.

Apart from certain country-specific varia-

tions, vehicles are not equipped with a tire-

change tool kit. For more information on

which tools are required to perform a wheel

change on your vehicle, consult a qualified

specialist workshop.

Necessary tire-changing tools can include, for

example:

Jack

Wheel chock

Lug wrench

Securing the vehicle to prevent it from

rolling away

If your vehicle is equipped with a wheel chock, it

can be found in the tire-change tool kit

(

Y page 339).

The folding wheel chock is an additional safety

measure to prevent the vehicle from rolling

away, for example when changing a wheel.

Fold both plates upwards :.

Fold out lower plate ;.

Guide the lugs on the lower plate fully into the

openings in base plate =.

Changing a wheel

375

Wheels and tires

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mercedes GLS 2018 Seite 377

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Mercedes GLS 2018

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info