#
Turn ratchet wrench 3 clockwise until jack
2 sits completely on jack support point 1
and the base of the jack lies evenly on the
ground.
#
Continue to turn ratchet wrench 3 until the
tire is raised a maximum of 1.2 in (3 cm) off
the ground.
#
Loosen and remove the wheel (/ page 542).
Removing a wheel
Requirements:
R
The vehicle is raised (/ page 539).
Mercedes-AMG vehicles: observe the notes in
the Supplement. Otherwise, you may not recog‐
nize dangers.
When changing a wheel, avoid applying any force
to the brake discs, since this could impair the
level of comfort when braking.
*
NOTE Damage to threading from dirt on
wheel bolts
#
Do not place wheel bolts in sand or on
a dirty surface.
#
Completely unscrew the wheel bolts.
#
Remove the wheel.
#
Install the new wheel (/ page 542).
Mounting a new wheel
Requirements:
R
The wheel is removed (/ page 542).
Mercedes-AMG vehicles: observe the notes in
the Supplement. Otherwise, you may not recog‐
nize dangers.
&
WARNING Risk of accident from losing a
wheel
Oiled, greased or damaged wheel bolt/wheel
nut threads or wheel hub/wheel mounting
bolt threads can cause the wheel bolts/
wheel nuts to come loose.
As a result, you could lose a wheel while driv‐
ing.
#
Never oil or grease the threads.
#
In the event of damage to the threads,
contact a qualified specialist workshop
immediately.
#
Have the damaged wheel bolts or dam‐
aged hub threads replaced.
#
Do not continue driving.
#
Observe the information on the choice of
tires (/ page 534).
For tires with a specified direction of rotation, an
arrow on the side wall of the tire indicates the
correct direction of rotation. Observe the direc‐
tion of rotation when installing.
&
WARNING Risk of injury from tightening
wheel bolts and nuts
If you tighten the wheel bolts or wheel nuts
when the vehicle is raised, the jack could tip.
542
Wheels and tires