Bedienungsanleitung Mercedes ML 350 - 2008 (Seite 301 von 561) (Englisch)

622505

301

Zoom out

Zoom in

Vorherige Seite

1/561

Nächste Seite

300

Controls in detail

Useful features

When the connection is established, the

message

Call Connected

appears in the

multifunction display. The Tele Aid system

will transmit data generating the vehicle

identification number, model, color and lo-

cation (subject to availability of cellular

and GPS signals).

A voice connection between the Customer

Assistance Center representative and the

occupants of the vehicle will be estab-

lished. Information regarding the operation

of your vehicle, the nearest

Mercedes-Benz Light Truck Center or

Mercedes-Benz USA products and servic-

es is available to you.

For more details concerning the Tele Aid

system, please visit www.mbusa.com and

use your ID and password (sent to you sep-

arately) to learn more (USA only).

Call priority

If other service calls such as a Roadside

Assistance call or Information call are

active, an Emergency call is still possible.

In this case, the Emergency call will take

priority and override all other active calls.

While the call is connected, you can change

to the navigation menu by pressing the NAV

button on the COMAND system.

The indicator lamp in the Information

button ¡ remains illuminated in red for

approximately 10 seconds during the system

self-check after switching on the ignition (togeth-

er with the SOS button and the Roadside

Assistance button •).

See system self-check (

컄 page 295) if the indi-

cator lamp does not come on in red or stays on

longer than approximately 10 seconds.

If the indicator lamp in the Information

button ¡ is flashing continuously and there

was no voice connection to the Response Center

established, then the Tele Aid system could not

initiate an Information call (e.g. the relevant cel-

lular phone network is not available). The mes-

sage

Call Failed

appears in the multifunction

display.

Information calls can be terminated using

the t button on the multifunction steering

wheel or the END button on the COMAND sys-

tem.

If the indicator lamps do not start flashing

after pressing one of the buttons or remain illu-

minated (in red) at any time, the Tele Aid system

has detected a malfunction or the service is not

currently active, and may not initiate a call. Visit

your authorized Mercedes-Benz Light Truck

Center and have the system checked or contact

the Response Center at 1-800-756-9018 (in the

USA) or 1-888-923-8367 (in Canada) as soon as

possible.

The indicator lamp in the respective button

flashes until the call is concluded. Emergency

calls can only be terminated by a Response

Center or Customer Assistance Center repre-

sentative, whereas Roadside Assistance and

Information calls can also be terminated by

pressing button t on the multifunction

steering wheel or using the END button on the

COMAND system.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mercedes ML 350 - 2008 Seite 301

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info