Bedienungsanleitung Mercedes S-Class Sedan - 2015 (Seite 495 von 502) (Englisch)

624700

495

Zoom out

Zoom in

Vorherige Seite

1/502

Nächste Seite

Comply with the important safety notes for

service products when handling brake fluid

(Y page 489).

The brake fluid change intervals can be found

in the Maintenance Booklet.

Only use brake fluid approved by Mercedes-

Benz according to MB Approval 331.0.

Information about approved brake fluid can

be obtained at any qualified specialist work-

shop or on the Internet at

http://bevo.mercedes-benz.com.

Have the brake fluid regularly replaced at

a qualified specialist workshop and the

replacement confirmed in the Maintenance

Booklet.

Coolant

Important safety notes

WARNING

If antifreeze comes into contact with hot com-

ponents in the engine compartment, it may

ignite. There is a risk of fire and injury.

Let the engine cool down before you add anti-

freeze. Make sure that antifreeze is not spilled

next to the filler neck. Thoroughly clean the

antifreeze from components before starting

the engine.

Only add coolant that has been premixed

with the desired antifreeze protection. You

could otherwise damage the engine.

Further information on coolants can be

found in the Mercedes-Benz Specifications

for Service Products, MB BeVo 310.1, e.g.

on the Internet at

http://bevo.mercedes-benz.com. Or con-

tact a qualified specialist workshop.

Always use a suitable coolant mixture,

even in countries where high temperatures

prevail.

Otherwise, the engine cooling system is not

sufficiently protected from corrosion and

overheating.

Have the coolant regularly replaced at a

qualified specialist workshop and the

replacement confirmed in the Maintenance

Booklet.

The coolant is a mixture of water and anti-

freeze/corrosion inhibitor. It performs the

following tasks:

corrosion protection

antifreeze protection

raising the boiling point

If the coolant has antifreeze protection down

to -35 ‡(-37 †), the boiling point of the cool-

ant during operation is approximately 266 ‡

(130 †).

The antifreeze/corrosion inhibitor concentra-

tion in the engine cooling system should:

be at least 50%. This will protect the engine

cooling system against freezing down to

approximately -35 ‡ (-37 †).

not exceed 55% (antifreeze protection

down to -49 ‡ [-45 †]). Otherwise, heat

will not be dissipated as effectively.

Mercedes-Benz recommends an antifreeze/

corrosion inhibitor concentrate in accord-

ance with

MB Specifications for Service Products 310.1

When the vehicle is first delivered, it is fil-

led with a coolant mixture that ensures

adequate antifreeze and corrosion protec-

tion.

The coolant is checked with every main-

tenance interval at a qualified specialist

workshop.

Filling capacities

Missing values were not available at time of

going to print.

Model Capacity

S 400 4MATIC

13.0 US qt (12.3 l)

S 600

S 600 MAYBACH

15.7 US qt (14.9 l)

Service products and filling capacities

493

Technical data

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mercedes S-Class Sedan - 2015 Seite 495

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info