Bedienungsanleitung Mercedes SL 2019 (Seite 327 von 330) (Englisch)

703703

327

Zoom out

Zoom in

Vorherige Seite

1/330

Nächste Seite

The coolant is a mixture of water and anti-

freeze/corrosion inhibitor. It is responsible for

the following:

anti-corrosion protection

antifreeze protection

raising the boiling point

If the coolant has antifreeze protection down

to -35 ‡ (-37 †), the boiling point of the cool-

ant during operation is approximately 266 ‡

(130 †).

The antifreeze/corrosion inhibitor concentra-

tion in the engine cooling system should:

be at least 50%. This will protect the engine

cooling system against freezing down to

approximately -35 ‡ (-37 †).

not exceed 55% (antifreeze protection down

to -49 ‡ [-45 †]). Otherwise, heat will not

be dissipated as effectively.

If the vehicle has lost coolant, add equal

amounts of water and antifreeze/corrosion

inhibitor.

Mercedes-Benz recommends an antifreeze/

corrosion inhibitor concentrate in accordance

with MB Specifications for Service Products

310.1.

When the vehicle is first delivered, it is fil-

led with a coolant mixture that ensures ade-

quate antifreeze and anti-corrosion protec-

tion.

The coolant is checked with every mainte-

nance interval at a qualified specialist work-

shop.

Filling capacities

Missing values were not available at time of

going to print.

Model Capacity

SL 450

Approx. 10.8 US qt

(10.2 l)

SL 550

Approx. 12.5 US qt

(11.8 l)

Mercedes‑AMG

SL 63

Mercedes‑AMG

SL 65

Approx. 10.5 US qt

(10 l)

Windshield washer system

Important safety notes

WARNING

Windshield washer concentrate is highly

flammable. If windshield washer concentrate

gets onto hot components of the engine or

the exhaust system, it can ignite. There is a

risk of fire and injury.

Make sure that windshield washer concen-

trate is not spilled in the vicinity of the filler

neck.

Only use washer fluid which is suitable for

lamp lenses, e.g. MB SummerFit or MB Win-

terFit. Unsuitable washer fluid may damage

the lamp lenses of the headlamps.

Only MB SummerFit and MB WinterFit

washer fluid should be mixed together. The

spray nozzles may otherwise become

blocked.

Do not use distilled or de-ionized water. Other-

wise, the level sensor may give a false reading.

When handling washer fluid, observe the

important safety notes on service products

(Y page 321).

At temperatures above freezing:

Fill the washer fluid reservoir with a mixture

of water and windshield washer fluid, e.g.

MB SummerFit.

Add 1 part MB SummerFit to 100 parts

water.

At temperatures below freezing:

Fill the washer fluid reservoir with a mixture

of water and washer fluid, e.g. MB WinterFit.

For the correct mixing ratio refer to the

information on the antifreeze reservoir.

Add windshield washer fluid, e.g. MB Sum-

merFit or MB WinterFit, to the washer fluid

all year round.

Service products and filling capacities

325

Technical data

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mercedes SL 2019 Seite 327

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Mercedes SL 2019

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info