Bedienungsanleitung Merida 2015 (Seite 19 von 56) (Englisch)

657617

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

4. Make sure the saddle is not twisted by using the top

tube

(f)

or the bottom bracket shell as a reference.

If necessary, open the clamping, realign the saddle

and retighten the clamping. For more information

see the chapters “Adjusting the MERIDA bike to the

rider” and “How to use quick-releases and thru ax-

les” in these MERIDA short operating instructions as

well as in your comprehensive MERIDA user man-

ual and in the instructions of the component manu-

facturers on the enclosed MERIDA CD-ROM.

5. Let your MERIDA bike bounce on the ground from

a small height. If there is any rattling, see where it

comes from. Check the bearings and bolted con-

nections, if necessary. Tighten them slightly, if

necessary.

6. Finally, take a good look at the whole MERIDA

bike to detect any deformations, color changes or

cracks

(g)

. Ride back very carefully by taking the

shortest route possible, even if your MERIDA bike

went through this check without any problems. Do

not accelerate or brake hard and do not ride your

bike out of the saddle. If you are in doubt about the

performance of your MERIDA bike, have yourself

picked up by car, instead of taking any risk.

Back home you need to check your MERIDA bike

thoroughly. Damaged parts must be repaired or

replaced. Ask your MERIDA dealer for advice. For

more information on carbon components see the

chapter “Special characteristics of carbon” in these

MERIDA short operating instructions as well as in

your comprehensive MERIDA user manual and in

the instructions of the component manufacturers on

the enclosed MERIDA CD-ROM.

Deformed components, especially compo-

nents made of aluminum, can break without

previous warning. They must not be repaired,

i.e. straightened, as this will not reduce the imminent

risk of breakage. This applies in particular to the fork,

the handlebars, the stem, the cranks, the seat post and

the pedals. When in doubt, it is for your safety always

the better choice to have these parts replaced. Ask your

MERIDA dealer for advice.

If your MERIDA bike is assembled with car-

bon components

(h)

, it is imperative that you

have it checked by your MERIDA dealer af-

ter an accident or similar incident. Carbon is extreme-

ly strong and durable with very low weight, making it

perfect for the production of high-performance parts.

However, one of the inherent properties of carbon is

that possible overstress may compromise the inner

carbon-ﬁber structure without showing any visible

deformation, as is the case with steel or aluminum. A

damaged component can fail without previous warning.

Risk of an accident!

Make it a rule to check the functioning and in

particular the limit stop of the rear derailleur

after a fall or if your MERIDA bike has toppled

over.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Merida 2015 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Merida 2015

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info