Bedienungsanleitung Meridian C52 (Seite 6 von 12) (Englisch)

494851

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

correct network lead to the COMMS sockets

may cause damage to the subwoofer which

will not be covered by this guarantee.

Attempted servicing by unauthorised people

may also invalidate this guarantee. Labour and

carriage charges are not covered unless by

local agreement.

OutsidetheUK,localwarrantyliabilityis

restricted to equipment purchased within

the territory. Our agents abroad are only

under contractual obligation to service under

guarantee equipment sold through them. They

are entitled to make a non-refundable charge

for any service carried out on other equipment.

This guarantee does not limit your statutory

rightswithintheUnitedKingdom.

ABOUT THE PRODUCT

The Meridian C52 combines the ﬁnest

materials with state of the art design to create

what we believe is a superior subwoofer

controller,emphasisingextremebass,depth,

clarity, control, and articulation.

Each unit provides two controller and power

ampliﬁer channels allowing the use of two

independent subwoofers. Both digital and

active analogue inputs are provided, allowing

the C52 to be connected either to a digital

surround controller or digital source with

adigitalcoaxoutput,ortoananalogue

preampliﬁer or surround controller with either

phono or balanced outputs.

Digital connectivity

The unit employs 96kHz/24bit digital-to-

analogue conversion and accept digital inputs

up to 96kHz including those carrying MHR

signals.

Separate analogue and digital power supplies

areusedtofeedtheC52’sprecisionelectronic

circuits, ensuring that both high and low

power sections receive continual smooth

supply.

If you are using the subwoofers with a digital

source, such as CD or DVD, the signals remain

in digital form until the last possible stage.

Subwoofer drivers

The C52 is designed to be used with Meridian

Installation Series subwoofer driver assemblies

such as the SW320. However, passive

subwoofers with similar speciﬁcations and

capabilities may alternatively be employed.

Power ampliﬁers

The C52 includes Class D high efﬁciency ultra

low output impedance ampliﬁers, optimised

for both music and movie soundtracks.

The whole electronic assembly is supplied from

substantial toroidal transformers feeding high-

quality, audiophile-grade capacitors.

C52 SPECIFICATIONS

Digitalinputs 2xcableinputs,32–96kHz

PCM using S/PDIF, or MHR

connection support with auto-

detection.

Analogueinputs 3xphonoinputs:mono,left,

right, per channel.

 2xXLRbalancedinputs:

Channel 1 and Channel 2.

Output stage Power ampliﬁer: 300W

Class D high efﬁciency ultra

low output impedance (per

channel).

Characteristics Distortion <0.01%, typically

<0.02% up to full power at

all frequencies.

 Noiseandhum<–72dBm.

 Frequencyresponse20Hz–

400Hz.

Control 2xsetsMeridianComms

(BNC in and out; DIN in and

out).

Variable gain control (per

channel).

Variable low pass ﬁlter 40Hz-

150Hz.

Filter defeat switch (per

channel).

Absolute phase (polarity)

switch (per channel).

Power

100/115/120V; 220/230/240V

AC 50-60Hz.

20-500VA

Meridian Audio reserves the right to amend

product speciﬁcations at any time.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Meridian C52 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info