Bedienungsanleitung Mesa Living 804.078 - YPZ (Seite 14 von 37) (Deutsch, Englisch, Holländisch, Französisch)

726067

Zoom out

Zoom in

Vorherige Seite

1/37

Nächste Seite

Operating methods

Timer setting

1. Setting timer ON

When the air conditioner is in standby state, press the button TIMER, the timer LED lamp is on. Meanwhile the

display will flicker “ ” for 5 times. At this moment press UP or DOWN to adjust time from 0.5h to 24h.

Within 3 hours , the time changes 0.5h by pressing UP or DOWN. Between 3 and 24 hours, the time changes 1h

by pressing UP or DOWN. During setting of timer, the operating modes after start can be selected, if COOL

mode is selected, the set temperature can be adjusted simultaneously. After the set time expires, the air

conditioner starts automatically and runs in the selected operating mode.

2. Setting timer OFF

When the air conditioner is running, press this button TIMER, the timer LED lamp is on. Meanwhile the display

will flicker “ ” for 5 times. At this moment press UP or DOWN to adjust time from 0.5h to 24h. Within 3

hours , the time changes 0.5h by pressing UP or DOWN. Between 3 and 24 hours, the time changes 1h by

pressing UP or DOWN. When the set time expires, the air conditioner turns off automatically.

3. Change of the set time

If you want to change the time during the running TIMER mode, you can press the button TIMER one time. The

display will flicker the remaining time, then press UP or DOWN to increase or decrease the time of the original

time. If you press TIMER again during flicker, the set time will be cancelled..

Operation

1. COOLING

 In ON or TIMER ON state press MODE to select COOL mode. The corresponding LED-light on the panel

is on.

 Press UP or DOWN to set the desired temperature (between 18 and 30℃ (64-86℉)).

 When pressing UP or DOWN once, temperature will go up or down by 1℃ or 1℉ every time.

 Press SPEED to set the desired ventilator speed and press LOW and HIGH to change the speed.

 After selecting COOL mode, press SLEEP on the remote control (or press UP and TIMER on the panel

simultaneously) to enter SLEEP mode. Both fans are set at LOW speed. When the set time expires, the

air conditioner turns off automatically.

2. DRY mode

 When the air conditioner is running, press MODE to select DRY mode. The corresponding LED-light on

the panel is on.

 Temperature and speed are not adjustable.

3. FAN mode

 Press MODE to select FAN mode. The corresponding LED-light on the panel is on.

 Press SPEED to select the desired speed and with LOW and HIGH the speed can be changed.

 Temperature is not adjustable.

Cautions:

 When full water indicator LED-light is on, the air conditioner stops working, you should drain water in

time. After draining the air conditioner will start automatically.

 Please close the curtains, if the room faces the sun directly.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mesa Living 804.078 - YPZ Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info