Bedienungsanleitung Mesko MS 7928 (Seite 6 von 132) (Alle Sprachen)

797765

Zoom out

Zoom in

Vorherige Seite

1/132

Nächste Seite

- Press button “F” to select fan mode, the LCD screen will show “FA”, next press the button “L” to get slow fan speed button or press the

button “M” to get fast fan speed button. During fan mode operation the temperature and sleeping functions cannot be setup.

Press button “A” to turn on and turn off the device, the buzzer will play signal once.

B. Mode selection button

C. Temperature / timer down button

MODE SELECTION on manual operation of control panel –

When the device is power on, choose mode you need between cooling mode or fan mode or dehumidifying mode as below:

Press the up and down buttons at the same time when you need shift to ℃.˚F

A. Power button

When the is powered on for the first time, the buzzer will shout, and then the device will get into standby status.

- Press button “J” to select cooling mode, next press the button “L” to get slow fan speed button or press the button “M” to get fast fan

speed button. Next press button “ C” or “ D” to adjust required temperature from 16℃ to 31℃, buttons are not available in fan or

dehumidifying mode.

Fan mode -

G. Timer button

Remote controller – Picture E

D. Temperature / timer up button

E. Sleep mode button

CONTROL PANEL manual operation – picture D

Cooling mode -

F. Fan speed selection button

- When the device is working, press button “G”, the LCD screen flashes, press the button “C” or “D” to set up the quantity of hours need to

pass before the device will shut off automatically. The LCD screen stops flashing, the timer icon will be illuminated, LCD screen shows

required to achieve temperature. This is a delayed start function.

Water full -

Button "G" - press it to set up or cancel timer.

Button "F" - press it to select fan speed in sequence: slow / fast wind speed.

Button "E" - press it to set up or cancel sleep mode.

Button "B" - press it to select operation mode: cool mode → dry mode → fan mode.

Sleep mode –

- Press button “K” to select dehumidifying mode, the LCD screen will show “dh”. Under dehumidifying mode, sleep mode cannot be setup,

and fan speed is fixed on slow fan speed automatically and cannot be changed. In order to switch off the dehumidifying mode select other

operation mode: cooling or fan mode.

Timer set up -

NOTE: Sleep mode is not available in dehumidify and fan modes.

The water full indicator lamp “N” will be illuminated and the buzzer will alarm for several second, then the compressor will stop to work when

the inner device water tank will be full.

Button "A" - the device will be started when it is energized or will be stopped, if you press this button again.

Timer operation range can be fixed by each one hour from 1 to 24 hours.

- When the device is not working, press button “G”, the LCD screen flashes, press the button “C” or “D” to set up the quantity of hours after

the device will start to operate. The LCD screen stops flashing and timer icon will be illuminated.

- The sleep mode is automatically programmed. After the first hour of operation, the temperature will increase by 1 ℃, after the second

hour of operation, the temperature will increase by another 1 ℃, and then remain at the same level.

- Press button “E” again to cancel sleep mode.

- Next press button “ C” or “ D” to adjust required temperature from 16℃ to 31℃.

REMOTE CONTROLLER operation – picture E

Dehumidifying mode –

The remote controller transmits signals to the system.

Button "C" / "D" - press to set up the operation time from 1 to 24 hours or required room temperature from 15 to 31°C when cooling mode is

switched on.

- At first Press button “J” to cooling mode, next press button “E” to turn on the sleep mode, then the device will work on Energy-Saving and

quiet type.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mesko MS 7928 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info