Bedienungsanleitung Mestic MAC-40 (Seite 9 von 24) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Norwegisch)

783616

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

ENGLISH

or EN1763. Connect the gas hose to the connecting piece of the appliance using a screw connection. It is important to follow the

installation and connection instructions to connect the appliance. Avoid twisting and bending the hose. Bends in the gas hose must

have a radius of more than 40 mm. The length of the hose should not exceed 1.50m. Before installation, check that the operating

pressure of the gas pressure regulator corresponds to the operating pressure of the appliance.

• Use soap water or gas leak spray to check connections for leaks. It is forbidden to check for leaks with a ame.

• Do not smoke: risk of explosion and burns.

• If you change the gas bottle and / or disconnect the hose, it is mandatory to close the gas bottle valve.

• Replace the hose if it is damaged or becomes porous and always before the expiration date printed on the side.

Throttle position

• This arrangement includes an adjustable appliance with an enclosed protection and a burner with an electric igniter.

• The adjustable device can be set in 3 different positions:

• Max Maximum cooling

• Min Minimum cooling

• 0 off Ignition position / burner gas supply closed

• The protection automatically maintains the gas supply to the burner as long as it burns. It automatically turns off the supply when the

ame goes out.

Operation of the gas cooler

• Open the valve of the gas cylinder. Press and hold the adjust button. Then turn the knob counterclockwise to Max.

• If the appliance has not been lit for a long time or if the gas cylinder has been changed, there may be air in the pipe. Therefore, the

Ignition may fail. Check if the pilot is lit by looking through the hole at the top of the aircraft. If the appliance does not light up, try

again after 10 seconds.

• Always set the thermostat to “MAX” for the rst hour. Then set the thermostat to the desired position.

• If the outside temperature is low, set the adjustable appliance to MIN after a sufciently long cooling down period in MAX period.

• Turn the thermostat to 0 and shut off the gas cylinder or the pressure regulator to switch off the appliance.

Maintenance

• For optimal use, the cool box must be defrosted regularly. Unplug it and remove all food. If necessary, use a cloth with warm water.

After defrosting, absorb all water with a dry cloth and clean the inside. Are you not using the device for a long time? Then leave the

lid slightly open to avoid an unpleasant odor.

• Clean the device regularly with warm water, if necessary with a cleaning agent.

• Never use a corrosive product. Dry the cleaned surfaces with a soft cloth.

• All repairs, especially those of the cooling unit or the gas burner system, must be carried out by a qualied technician.

Recycling

This product bears the selective sorting symbol for waste electrical and electronic equipment This means that this

product must be handled pursuant to European Directive (2012/19/EU) in order to be recycled or dismantled to minimize

its impact on the environment. For further information, please contact your local or regional authorities. Electronic

products not included in the selective sorting process are potentially dangerous for the environment and human heath

due to the presence of hazardous substances.

Declaration of conformity

Hereby, Gimeg Nederland B.V., declares that the MAC-40 device complies with the basic requirements and other relevant regulations

specied in the European Electromagnetic Compatibility Directive (EMC 2014/30 / EU) and Low Voltage Directive (LVD 2014/35 / EU)

and guidelines for appliances that burn gaseous fuels (GAR EU 2016/426)

You can request a full declaration of conformity from the address shown on the back.

CZ, NL, SE

& SK

I3B/P G30/31

(30mbar)

GB, IE, BE, ES,

FR, IT & PT

I3+G30/31

(28-30 mbar)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mestic MAC-40 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info