Bedienungsanleitung Mestic MC-100 (Seite 7 von 22) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Norwegisch)

783608

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

When the food is cooked, use the handle to lift the cover. Remove the food using a plastic spatula. Never use a metal clip or a knife,

as they may damage the non-stick coating of the baking trays.

Once you have nished cooking, disconnect the plug from the wall socket and let the appliance open for it to cool down.

5. MAINTENANCE AND CLEANING

In any event, unplug and let the appliance cool down before cleaning.

Reminder: do not immerse the appliance in water or any other liquid. Do not place the appliance in the dishwasher.

Do not use tools or abrasive solutions that would damage the coating of trays. You can use a wooden kitchen utensil or paper towel

to remove most of the dirt.

Clean the trays with a slightly damp sponge, or equivalent, and washing up liquid.

Wipe the outside of the appliance with a damp cloth only. Allow the device to dry after cleaning. Do not connect it if it is not dry.

6. WARRANTY AND LIMITATION OF LIABILITY

This product is guaranteed for a period of 24 months (dened by the local legislation) from the date of purchase, against any failure

resulting from a manufacturing or material defect.

This warranty does not cover damage resulting from improper installation, improper use, or normal wear of the product.

More precisely, the warranty does not cover:

• Damage or problems caused by improper use, accident, alteration or an electrical connection of intensity or wrong voltage.

• The changed products, whose warranty seal or the serial number have been damaged, altered, deleted or oxidized.

• Replaceable batteries and accessories are guaranteed for a period of 6 months.

• Battery failure, which occurred by a too long loading or by the non-compliance of the safety instructions explained in the leaet

• Aesthetic damage, including scratches, dents or any other element.

• Damage caused by any operation carried out by an unauthorized person.

• Defects caused by normal wear or due to the normal aging of the product

• Software updates, due to a change in network settings

• Product failure due to the use of third party software to modify, change, adapt or modify the existing one

• Product failure due to the use without the accessories approved by the manufacturer

• Rusted products

In no case, shall the manufacturer be responsible for the loss of data stored on the disk. Similarly, the manufacturer is not required to

check that the SIM/SD cards are well removed from the returned products.

The repaired or replaced products may include new and/or reconditioned components and equipment.

Implementation measures

To obtain a warranty service, you are kindly requested to bring your product back at your point of sale tted with your proof of

purchase (receipt, invoice, etc.), of the product and its supplied accessories, with its original packaging. It is important to have

information regarding the date of purchase, model and serial number or IMEI (these information usually appear on the product, the

packaging or your proof of purchase).

Otherwise, you must return the product with the necessary accessories for proper operation (power supply, adapter, etc.)

In the event your claim is covered by the warranty, the after-sales service may, within the limits of the local legislation, either:

• Repair or replace the defective parts

• Exchange the returned product with a product having at least the same features and which is equivalent in terms of performance.

• Reimburse the product at the purchase price of the product mentioned on the proof of purchase.

If one of these 3 solutions is used, this does not give right to the extension or renewal of the warranty period.

ENGLISH

Declaration of conformity

Hereby Gimeg Nederland B.V. declares that the device MC-100, applies all basic requirements and other relevant regulations listed

in the European directive for electromagnetic compatibility (2014/30/EU) and low voltage directive (2014/35/EU). If you require a full

declaration of conformity, you can contact the adress listed on the backside of this manual

Recycling

This product bears the selective sorting symbol for waste electrical and electronic equipment This means that

this product must be handled pursuant to European Directive 2012/19/EU in order to be recycled or dismantled to

minimize its impact on the environment. For further information, please contact your local or regional authorities.

Electronic products not included in the selective sorting process are potentially dangerous for the environment and

human heath due to the presence of hazardous substances.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mestic MC-100 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info