Bedienungsanleitung Mestic MW-120 (Seite 8 von 12) (Deutsch, Englisch, Holländisch, Französisch)

719131

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

User manual

Please read this instruction manual carefully to ensure correct use of the machine

Thank you for purchasing this DMR Semi Auto Washing Machine.

The design of this product has adopted the special patent technology of cabinet integration. The entire body casing is made of plastic and

this ensures that your DMR semi auto washing machines will never be rust eaten. The washer is relatively lighter and space saving as

compared to other general twin-tub washing machines.

Through the integration of new technology, this washer with large wave pulsator and new water ow, will not only produce less twisting

of the clothing but also better cleaning and washing effect. The functions of water inlet, sprinkling, spin-dry and water ow are also made

available to save time, labor and water usage.

We trust that you will nd your purchase of this beautifully designed and dignied-looking semi auto washing machine to your satisfaction

Technology parameter and specications

Water capacity Input power Power source Size (lxwxh) Weight

high low wash dry voltage hertz 655x405x760 (mm) 15kg

36 L 32 L 250 W 120 W 220 V 50 Hz

Troubleshooting

Problem Reason Solution

The pulsalor is too slow Power cut or switch off Switch on the power

Transmission belt left off Assemble the transmission belt

Belt pulley has become loose Tighten the belt

Pulsator is blocked Remove the block

The pulsalor does not

rotate

Belt is loose Tighten the belt or renew it

The clothes in the spin dry tub loosened Tighten the belt and the screw

Abnormal noise and

vibration

The clothes in the spin dry tub is unbalanced Replace the clothes in the tub

There is something jammed between the pulsator

and the wash tub

Remove the jammed object(s)

Water leaks from the

wash tub

Wash tub was not connected tightly to the hose Reconnect and tighten the hose

Spin-dry basket does not

rotate

The slight switch is in loose contact Adjust the contactor of the switch

The xed screw of spin dry basket or shaft coupling

is loose

Tighten the screw

The xed screw of spin dry basket or shaft coupling

is loose

Remove the textile

Brake dragline is loose Tighten the dragline

The spin tub does not

drain

Something had cropped into the space between

spin tub and spin dry basket

Remove the object

Points of attention:

• When the problem cannot be resolved, please contact the Service Center.

• For your own safety, ensure that the ground connection is correct.

• Never put your hands into the spin tub whilst it is working.

• Never wash textiles containing volatile materials in order to avoid machine damage or water blockage due to stains.

• The timer should always be turned clock wise

• When abnormal sounds/movements occur during operation, stop the washing machine as soon as possible and check. (Please refer

to troubleshooting)

• When washing, the water temperature should be below 60˚C, otherwise, the plastic components may be deformed.

ENGLISH

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mestic MW-120 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info