Bedienungsanleitung Metabo ASA 30 L PC Inox (Seite 14 von 100) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

595125

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

ENGLISHen

during the work breaks (press down three times)

while keeping the suction opening shut (on the

suction hose or on the container).

7.3 Integrated blower function

For air-cleaning, drying purposes and diverting

extracted air. For this purpose, insert a suitable

hose (scope of delivery) in the exhaust port (5).

Do not allow the emitted blower air to enter

confined spaces uncontrollably. Ensure the

hose used is clean. Dust can be hazardous to

health.

7.4 Power socket (2)

The power socket (2) is designed for connec-

tion to a power tool only.

The total maximum permissible current

consumption (of vacuum cleaner and

connected unit) must not exceed the value I

max

(see

table, page 3).

If the switch (1) is in the ' ' position, the vacuum

cleaner is switched on or off by means of a power

tool connected to the mains socket (2).

8.1 Dry Vacuuming

Vacuum using a dry filter, dry appliance and dry

accessories only. If the cartridge is damp, dust may

stick and form a crust.

Always use fleece filter bag (9) or PE filter bag (10)

together with pleated filter (11).

8.2 Wet Vacuuming

Never operate the appliance without inserting

a pleated filter (11). Otherwise, the appliance

may be destroyed and water may also escape.

You can use either fleece filter bags (9) or PE filter

bags (10). The pleated filter (11) is suitable for wet

vacuuming.

Before carrying out any wet vacuuming, remove the

dry vacuumed material. This process will prevent

severe soiling and encrustation.

The appliance has a float system that enables it to

switch off the air flow when the maximum liquid level

is reached. When this happens, you will hear a

distinct change in the sound of the motor. Then

switch off the appliance and pull the plug from the

socket. Only vacuum liquids when the float is

working properly (see section 10. Maintenance).

After the appliance is switched off, some water may

run back out of the hose.

Before emptying, first take the suction hose out of

the liquid.

If you are then going to dry vacuum, insert a dry

filter. If there is frequent switching between dry and

wet vacuuming, we recommend the use of a second

(replacement) filter. Allow the filter, container and

accessories to dry: otherwise dust may adhere to

damp components.

8.3 Transport

Leave the hose on the appliance to prevent dust

from accidentally being released.

Secure the suction hose or mains connection lead

to the appliance using the transport bracket.

The upper part (3) must be securely sealed to the

container (8) - check that the snap locks (6) are

closed.

9.1 General Cleaning Instructions

Clean the container and accessories with water.

Wipe the upper part (3) with a damp cloth.

Caution! This appliance contains dust that is

harmful to health. Discharge and maintenance

operations (including disposal of the dust collection

containers) must only be carried out by qualified

specialists wearing appropriate protective clothing

and equipment.

Emptying the Container

Only permitted for dusts with

occupational exposure limits > 1 mg/m

- Unplug mains cable. Ensure the plug cannot be

reconnected accidentally.

- Open the snap locks (6). Remove the upper part

(3) from the container (8).

- Tip out the container.

Disposing of the Fleece Filter Bag

- Pull the mains plug. Ensure the plug cannot be

reconnected accidentally.

- Put on a dust mask.

- Open the snap locks (6). Remove the upper part

(3) from the container (8).

- Carefully pull back the fleece filter bag (9) from the

suction opening (7).

- Dispose of the vacuumed material in accordance

with legal regulations.

Disposing of the PE Filter

Bag

-Insert mains plug.

- Switch on the vacuum cleaner and clean the filter:

Press the button (4) ('PressClean' see

section7.2).

- Switch off the vacuum cleaner: turn the switch (1)

to the "0" position.

- Put on a dust mask.

- Open the snap locks (6). Remove the upper part

(3) from the container (8). Before setting down the

upper part, turn switch (1) to the "I" position so

that any falling dust is vacuumed.

- Carefully pull back the PE filter bag (10) from the

suction opening (7).

- Dispose of the vacuumed material in accordance

with legal regulations.

10.1 General Instructions

Before performing any maintenance, always

switch off the appliance and remove the mains

plug. Ensure the plug cannot be reconnected acci-

dentally.

8. Use

9. Cleaning

10. Maintenance

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Metabo ASA 30 L PC Inox Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info