Bedienungsanleitung Metabo ASA 32 L (Seite 14 von 96) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

595121

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

ENGLISHen

If the switch is (5) in the "0" position, you can use

the plug socket as an extension lead (e.g. for a light

fitting).

If the (6) switch is in the "A" position and the (5)

switch is in the "I" position, the vacuum cleaner can

be activated or deactivated by a power tool

connected to the power socket (7).

8.1 Dry Vacuuming

Vacuum using a dry filter, dry appliance and dry

accessories only. If the cartridge is damp, dust may

stick and form a crust.

Always use the paper filter bag (13) with the pleated

filter (11).

8.2 Wet vacuuming

Never operate the machine without inserting a

pleated filter (11). The machine may be

destroyed and water may also escape.

Vacuum without a paper filter (13) bag. The pleated

filter (11) is suitable for wet vacuuming.

Before carrying out any wet vacuuming, remove the

dry vacuumed material. This process will prevent

severe soiling and encrustation.

The float valve interrupts the suction process if the

container is full. Switch off the motor, empty

container and pleated filter (11), if required.

After switching off, some water may run back out of

the hose.

Before emptying, first of all take the suction hose out

of the liquid.

Use a dry pleated filter to carry out dry vacuuming

afterwards. If you are frequently switching between

dry and wet vacuuming, we recommend the use of

a second (replacement) pleated filter. Allow the

pleated filter, container and accessories to dry:

otherwise dust may adhere to damp components.

8.3 Transport

Leave the hose on the machine to prevent dust from

accidentally being released.

Wrap the suction hose about the vacuum cleaner.

Wind the mains connection lead (2) about the upper

part, as shown.

The upper part (1) must be securely sealed to the

container (4) - check that the snap locks (3) are

closed.

9.1 General Cleaning Instructions

Clean the container and accessories with water.

Wipe the upper part (1) with a damp cloth.

Caution! This appliance contains dust that is

harmful to health. Discharge and maintenance

operations (including disposal of the dust collection

containers) must only be carried out by qualified

specialists wearing appropriate protective clothing

and equipment.

Emptying the Container

Only permitted for dusts with

occupational exposure limits > 1mg/m

- unplug mains cable.

- Open the snap locks (3). Remove the upper part

(1) from the container (4).

- Tip out the container.

Remove the paper filter bag.

- unplug mains cable.

- Open the snap locks (3). Remove the upper part

(1) from the container (4).

- Carefully remove the paper filter bag (13). Seal the

flange of the filter bag by folding over the cover.

- Dispose of the vacuumed material in accordance

with legal regulations.

Clean the pleated filter

- Occasionally tap the pleated filter to remove (11)

any dust that has gathered on it. If the filter is very

dirty, you can clean it with water and a soft brush.

Allow to filter to dry properly afterwards.

10.1 General Instructions

Before performing any maintenance, always

switch off the machine and remove the mains

plug.

Clean the appliance (see section9.).

For maintenance by the user, the vacuum cleaner

must be taken apart, cleaned and maintained, to the

extent possible, without endangering maintenance

staff or other people.

Preventive Measures

Appropriate preventive measures include: cleaning

the appliance before disassembly; providing local

filtered forced ventilation where the vacuum cleaner

is disassembled; cleaning of the maintenance area

and providing suitable personal protective clothing

and equipment.

When carrying out maintenance or repairs, it is

essential to dispose of any contaminated objects

that cannot be adequately cleaned. These objects

must be disposed of using impermeable bags and

in accordance with the applicable regulations for

removing such waste.

10.2 Reduction in suction power

If the suction power decreases, carry out the

following steps:

1. Empty the container or replace the paper filter

bag (13).

2. Clean or replace the pleated filter (11).

10.3 Replacing the pleated filter (11)

(11)Seal the pleated filter immediately in a dust-

tight plastic bag and dispose of it in accordance with

regulations. Fit a new pleated filter, ensuring that it

is properly and securely positioned. See section

6.2.

8. Use

9. Cleaning

10. Maintenance

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Metabo ASA 32 L Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info