Bedienungsanleitung Metabo ASR 25 L SC (Seite 19 von 136) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

595126

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

ENGLISH en

8.4 Transport

In the case of the ASR 25 L SC / ASR 50 L SC, leave

the hose on the appliance to prevent dust acciden-

tally escaping.

In the case of ASR 50 M SC, seal the suction

opening (13) with a sealing plug (12) and join the

hose ends to prevent dust from escaping.

Wrap the suction hose about the vacuum cleaner.

Place the accessories in a suitable plastic bag and

seal the bag.

Suspend the mains connection lead on the

cable

holder

(11).

The upper part (8) must be securely sealed to the

container (10) - check that the snap locks (9) are

closed.

9.1 General Cleaning Instructions

Clean the container and accessories with water.

Wipe the upper part (8) with a damp cloth.

Caution! This appliance contains dust that is

harmful to health. Discharge and maintenance

operations (including disposal of the dust collection

containers) must only be carried out by qualified

specialists wearing appropriate protective clothing

and equipment.

Emptying the Container

Only permitted for dusts with

occupational exposure limits > 1 mg/m

- Unplug mains cable.

- ASR 50 M SC: remove suction hose, seal suction

opening (13) with sealing plug (12).

- Open the snap locks (9). Remove the upper part

(8) from the container (10).

- Tip out the container.

Dispose of the paper filter bag/fleece filter bag.

- Unplug mains cable.

-Pull on mask.

- ASR 50 M SC: remove suction hose, seal suction

opening (13) with sealing plug (12).

- Open the snap locks (9). Remove the upper part

(8) from the container (10).

- Carefully pull back and remove the paper filter bag

(7)/fleece filter bag (6) from the suction opening

(13). Seal the flange of the paper filter bag/fleece

filter bag by folding over the cover.

- Dispose of the vacuumed material in accordance

with legal regulations.

Disposing of the PE Filter Bag

-Insert mains plug.

- Switch on the vacuum cleaner and vibrate the

filters: turn the switch (1) to the "RA" position.

- Switch off the vacuum cleaner: turn the switch (1)

to the "0" position.

-Pull on mask.

- ASR 50 M SC: remove suction hose, seal suction

opening (13) with sealing plug (12).

- Open the snap locks (9). Remove the upper part

(8) from the container (10). Before setting down

the upper part, turn switch (1) to the "I" position so

that any falling dust is vacuumed.

- Carefully pull back the PE filter bag (5) from the

suction opening (13). Seal the flange of the PE

filter bag by folding over the cover.

- Dispose of the vacuumed material in accordance

with legal regulations.

9.2 Special cleaning instructions for

ASR 50 M SC

In the case of class M machines, the outside of the

machine should be cleaned (vacuumed and wiped

down), or treated with sealants before being removed

from the hazardous area. All machine parts must be

considered to be contaminated when removed from the

hazardous area: suitable measures must be taken to

prevent any dispersal of the dust. When carrying out

maintenance or repairs, it is essential to dispose of any

contaminated objects that cannot be adequately

cleaned. These objects must be disposed of using imper-

meable bags and in accordance with the applicable regu-

lations for removing such waste.

10.1 General Instructions

Before performing any maintenance, always

switch off the machine and remove the mains

plug.

Clean the appliance (see section9.).

For maintenance by the user, the vacuum cleaner

must be taken apart, cleaned and maintained, to the

extent possible, without endangering maintenance

staff or other people.

Preventive Measures

Appropriate preventive measures include: cleaning

the appliance before disassembly; providing local

filtered forced ventilation where the vacuum cleaner

is disassembled; cleaning of the maintenance area

and providing suitable personal protective clothing

and equipment.

10.2 Reduction in suction power

If the suction power decreases, carry out the

following steps:

1. Clean the filter cassettes by activating the elec-

tromagnetic vibrator (set switch (1) to the "RA"

position).

2. Empty the container or replace the paper filter

bag (7)/fleece filter bag (6) or PE filter bag (5).

3. Replace the filter cassettes (17), or rinse them

under running water, dry them and then replace.

10.3 Renew the filter cartridges (17)

Shake the filter cassettes (17) once again before

replacing the filters by switching on the electromag-

netic vibrator (set switch (1) to the "RA" position).

Use a coin or a similar object to turn the locking

knob (15) on the locking bar (14) counter-clockwise

through 90° and push the bar (14) to the rear. Swing

up the hood and pull up the filter cartridges (17) to

remove them. Seal the removed filter cassettes

immediately in a dust-tight plastic bag and dispose

of them in accordance with regulations. Insert new

9. Cleaning

10. Maintenance

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Metabo ASR 25 L SC Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info