ENGLISH en
11
Original operating instructions
1. Declaration of Conformity
2. Plea
3. Specif
4. General Safety Inform
5. Overview
6. UnpaAssembly and Transport
7. Machine Details
8. Initi
9. Ope
10. Care and Maintenance
11. Accessor
12. Repairs
13. Environmental Protection
14. Troubleshooting Guide
15. Technical Specifi
We, being solely re,
these band saws, identified by
number *1), meet all relevant requiremen
directives *2) and standards *3). Test report
Issuing testing authority *5), Tech
for *6) - see page 4.
These operating in have been written to
make it easier foryoe user, to learn how to
operate this machine and to do so s
instructions
– Read these instructions before use
attention to the safety information.
– These operatin
people with basic technic
regarding the op
similar electrical tools. Inexperiencend
persons are strongly ad
advise
person before op
– Keep all docume
for future reference. Retain your proof of
purchase in case of a future warranty claim.
– This machine mus
someone
machine documen
– The manufacture
damage caused by neglect of these operatin
instructions.
Information in these ins
under
Danger!
Risk of personal injury or
mental damage.
Risk of electric shoc
Risk of personal injury by electric
shock.
Entanglement
Risk of personal injury by body par
or clothing b
tating saw blade.
Caution!
Risk of material damage.
Note:
Additional information.
The band saw is suitable for cutting wood,
plastics, non-ferrous metals (not hard metal or
hardened metal).
Do not cut round stock transverse to its
longitudinal
The rotating saw belt could turn the work piece.
When sawing thin sto
guide must be used for firm support.
Any other use is not as specified. The
manufacturer assumes no liability for any damage
caused by unspecified use.
Modification of the ma
approved by the manufacturer can cause
unforeseeable damage!
Caution!
When using power tools, the follow
measures must be taken to protect against electric
shock, other injury o
When using this tool, obser
safety instructions to exclude the risk of
personal in
Please
instructions
Where applicab
regulations for the prevention of accidents
pertaining to the use of band saws.
General haza
Keep your work area
invites accidents.
Be alert. Know what yo
work with
while under the influence of drugs, alcohol or
medication.
Consider environm
area well lighted.
Prevent adverse body positions. Ensure firm
footing and keep your balance at all times.
When working lon
Do not operate the machine near inflammabl
liquids or gases.
The machine shall only be started and operated
by persons familiar
at any time aware of the dangers associated
with the operation of such machine.
Persons under 18 years of age shall use thi
machine only inse of th
training, under the supervisio
Keep bystanders
the danger zone. Do not pe
touch the machine or pow
running.
Do not overload the machine – us
the performance range it was designed for (see
"Technical Specifi
Use the correct power tool for your application.
The correct power tool will do the job
safer. Danger!
Risk of electric shock!
Do not expose the machine to rain.
Do not operate the machine in a damp or wet
environment.
Prevent body contact with earthed objects such
as radiators, pipes, co
when operating this machine.
Do not use the power cable for any purpose it is
not intended for.
Pull the plug out of the socket before making
any adjustments, converting or servicing the tool
or if you do not use it.
Risk of injury by moving parts!
Do not operate the machine wi
guards.
Always keep sufficient distance to the saw belt.
Use suitable feeding
sufficient distance to driven components when
operating this ma
Wait for the saw belt to come to a co
before removing cutoffs, scrap, etc., from the
work area.
Cut only stock o
held during cutting.
Do not attempt to stop
the work piece against its
Ensure th
supply before servic
Ensure thching on (e.g. after
servicing) no to
the machine.
Unplug if the machine is
Do not operate tool while under the influence of
drugs, alcohol or medication. There is the risk
electrical shock. Ask a qualified electrician
immediately to replace a
Regularly check extension cables and replace i
damaged.
When working out of doo
cables that are also approved for outdoors.
Cutting hazard, even with the cutting
tool at standstill!
Wear gloves when chan
Store saw belts in
get hurt.
Risk of kickback (work piece
by the saw belt and thrown against the
operator)!
Do not jam any work pieces.
Cut thin o
fine-toothed band saw belts. Always use sharp
band saw belts.
If in doubt, check piece for inclusion of
foreign matter (e.g. nails or screws).
Cut only s
held during cutti
Never cut several work pieces at the
– and also no bun
individual pieces. Risk of personal injury if
individual pieces are caught by the saw belts
uncontrolled.
When cutting round stock, use a suitable jig to
prevent the work piece from turning.
Entangelem
Ensure that during operati
body or clothing can be c
rotating components (no ties no gloves, no
clothes with
a hairnet
Never cut workpieces to which ropes, cords,
strings, cables ors are attached or which
contain such materials.
Hazard generated by insufficient
personal protection gear!
Wear hearing protection.
Wear safety glasses.
Wear dust mask.
Wear suitable w
Wear non-slip footwear.
Wear gloves when handling the saw belts and
rough work pieces.
Risk of injury by inhaled wood dust!
Some types
may cause cancer when inhaled. Work only with
a suitable dust collector
The dust collector must comply wi
stated in the technical specification
See to it that only as lile as possible wood
will get into the environment:
– Remove wood dust deposit in the work area
(do not blow
– fix any leakages on the dust collector;
– ensure good ventil
Table of Contents
1. Declaration of Conformity
2. Please Read First!
3. Specified Conditions of U
4. General Safety Information
