Bedienungsanleitung Metabo BAS 600 (Seite 15 von 38) (Deutsch, Englisch, Holländisch, Französisch)

451402

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

5 Electrical Equipment

- Have a damaged power cable replaced by a qualified

electrician immediately. Risk of electric shock if

operated with a damaged power cable.

- Persons under 16 years of age should not operate this

machine.

- This band saw is equipped with an electronic motor

brake.

A light humming sound emitted from the switch for a

short period after connection to power is normal and

does not indicate a fault.

If the brake fails have the fine-wire fuse inside the switch

checked.

The max. number of 20 switching operations per hour

should not be exceeded.

The electrical connection should be designed in such

way that a dust collector, connected to the band saw,

does start at the same time the band saw is switched on

(e.g. induction coil in the supply line).

Connection to Power Mains

Single-phase (model BAS 600 WNB)

Connection to power mains by a plug type Schuko or

local equivalent. The outlet the plug is connected to must

be installed according to DIN/VDE 100 or equivalent,

must be earthed and should be protected by a residual

current device (RCD) of 30 mA capacity. The power

supply required is 230 V 50 Hz. The supply circuit should

be protected by a 16A time-lag fuse or miniature circuit

breaker, its conductor cross section should be at least

3 x 1.5 mm

Three-phase (model BAS 600 DNB)

Connection to power mains by a CEE 16A industrial type

plug or local equivalent. The outlet the plug is connected

to must be installed according to DIN/VDE 100 or

equivalent on a 5-wire supply circuit (L1, L2, L3,N, PE)

and should be protected by a residual current device

(RCD) of 30 mA capacity. The power supply required is

3 x 400V 50Hz. The supply circuit should be protected by

3 x 16A time-lag fuses or miniature circuit breakers, the

minimum required conductor cross section is

5 x 1.5 mm

Change of Direction of Rotation (model BAS

600 DNB)

On machines with 3-phase motors the direction of rotation

needs to be checked after connection to power mains by

briefly starting the machine. If required, change direction

of rotation by turning the slotted knob inside the CEE

plug with a flat blade screwdriver.

Fig. 21

6 Dust Collection

If this band saw is operated indoors for more than 30

minutes, it is required to be connected to a dust collection

device (the dust of oak and beech is classified as

carcinogenic).

A dust collector, to be connected to this band saw, must

be capable of producing an air speed rate of 20 m/sec at

the saw's suction port. The band saw's suction port has

an outer diameter of 100 mm.

Dust collector automatic start

The electrical connection of the band saw must ensure

that a dust collector, connected to the band saw, does

start automatically when the band saw is switched on,

and provide for 20 second post-running after the band

saw is switched off.

7 Optional Accessories

It is possible to fit this band saw with a number of

accessories for specific applications. For product liability

reasons it is pointed out that the band saw itself as well

as all accessories offered should only be used for the

applications specified. Any other application requires

the consent of Elektra Beckum in writing. Please do not

hesiate to contact Elektra Beckum or our local

representative for further technical information.

Crosscut and Mitre Fence PK/BAS

Stock-no. 091 000 8048

other accessories upon request

Blade for wood contour cuts

3380x6x0.5 mm

tooth spacing A 4 mm

Stock-no. 090 900 0408

General purpose blade for straight

and contour cuts 3380x15x0.5 mm

tooth spacing A 6 mm

Stock-no. 090 900 0394

8 Replacement Saw Blades

Standard delivery for BAS 600: general purpose blade

with induction hardened teeth for longer service life.

Blade for straight cuts

3380x25x0.6 mm

tooth spacing A 4 mm

Stock-no. 090 900 0416

Blade for cutting fire wood

3380x25x0.6 mm

tooth spacing A 8 mm

Stock-no. 090 900 0424

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Metabo BAS 600 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info