Bedienungsanleitung Metabo BE 500-6 (Seite 9 von 68) (Alle Sprachen)

658442

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

ENGLISH en

Original Instructions

We, being solely responsible, hereby declare that

these drills, identified by type and serial number *1),

meet all relevant requirements of directives *2) and

standards *3). Technical documents for *4) - see

page 3.

The drills are suitable for non-impact drilling in

metal, wood, plastic and similar materials.

Furthermore, the machine is suitable for thread

tapping and screwdriving.

The user bears sole responsibility for any damage

caused by inappropriate use.

Generally accepted accident prevention

regulations and the enclosed safety information

must be observed.

For your own protection and for the

protection of your power tool, pay

attention to all parts of the text that are

marked with this symbol!

WARNING – Reading the operating

instructions will reduce the risk of injury.

WARNING Read all safety warnings and

instructions. Failure to follow all safety

warnings and instructions may result in electric

shock, fire and/or serious injury.

Keep all safety instructions and information for

future reference.

Pass on your power tool only together with these

documents.

Use the side handle(s), supplied with the tool.

Loss of control can cause personal injury.

Mains powered machines: hold the power tool

by the insulated gripping surfaces when

performing an operation during which the

cutting accessory may come into contact with

hidden wiring or its own cord. A cutting

accessory contacting a "live" wire may make

exposed metal parts of the power tool "live" and

could give the operator an electric shock.

Cordless machines: hold the power tool by the

insulated gripping surfaces, when performing

an operation during which the cutting

accessory may contact hidden wiring. A cutting

accessory contacting a "live" wire may make

exposed metal parts of the power tool "live" and

could give the operator an electric shock.

Ensure that the place where you wish to work is free

of power cables, gas lines or water pipes (e.g.

check using a metal detector).

Smaller workpieces must be secured in such a way

that they are not carried along with the tool (e.g. by

clamping in a vice or on a work bench with screw

clamps).

Keep hands away from the rotating tool! Remove

chips and similar material only with the machine at

a standstill.

High forces are released if the tool jams or catches.

Always hold the machine with both hands by the

intended handles, take a secure stance and

concentrate on the work.

Caution must be exercised when driving screws into

hard materials (driving screws with metric or

imperial threads into steel)! The screw head may

break or a high reverse torque may build up on the

handle.

Reducing dust exposure:

Some of the dust created using this power tool

may contain substances known to cause

cancer, allergic reaction, respiratory disease, birth

defects or other reproductive harm. Some

examples of these substances are: lead (from lead-

based paints), crystalline silica (from bricks cement,

etc.), additives for wood treatment (chromate, wood

preservative), some types of wood (like oak and

beech dust), metals, asbestos.

The risk from exposure to such substances will

depend on how long the user or nearby persons are

being exposed.

Do not let particles enter the body.

To reduce exposure to these substances: work in a

well ventilated area and wear protective equipment,

such as dust masks that are specially designed to

filter out microscopic particles.

Observe the relevant guidelines for your material,

staff, application and place of application (e.g.

occupational health and safety regulations,

disposal).

Collect the generated particles at the source, avoid

deposits in the surrounding area.

Use suitable accessories for special work. In this

way, fewer particles enter the environment in an

uncontrolled manner.

Use a suitable extraction unit.

Reduce dust exposure with the following measures:

- Do not direct the escaping particles and the

exhaust air stream at yourself or nearby persons

or on dust deposits.

- Use an extraction unit and/or air purifiers.

- Ensure good ventilation of the workplace and

keep it clean using a vacuum cleaner. Sweeping

or blowing stirs up dust.

- Vacuum or wash protective clothing. Do not blow,

beat or brush.

4.1 Special safety instructions for mains

powered machines:

Avoid inadvertent starts by always unlocking the

switch when the plug is removed from the mains

socket or whenever the power fails.

1. Declaration of Conformity

2. Specified Use

3. General Safety Instructions

4. Special Safety Instructions

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Metabo BE 500-6 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info