Bedienungsanleitung Metabo BS 14.4 (Seite 10 von 64) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

594941

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

ENGLISHen

See page 2.

1 Drill chuck / drill chuck sleeve*

2 Adjusting sleeve (torque control, maximum

torque)

3 Slide-switch (1st/2nd gear)

4Belt hook

5 Rotation selector switch (direction of rotation

setting, transporting safety device)

6Trigger switch

7Handle

8LED lights

9 Battery pack release button

10 Battery pack *

11 Capacity and signal indicator *

12 Capacity indicator button *

13 Protective cap *

*equipment-specific

6.1 Multifunctional monitoring system

of the machine

If the machine switches off automatically, the

machine electronics have activated automatic

protection mode. A warning signal sounds

(continuous beeping). The beeping stops after a

maximum of 30 seconds or when the trigger (6) is

released.

In spite of this protective function, overloading

is still possible with certain applications and

can result in damage to the machine.

Causes and remedies:

1. Battery pack almost flat (the electronics

prevent the battery pack from discharging totally

and avoid irreparable damage).

If one LED (11) is flashing, the battery pack is

almost flat. If necessary, press the button (12)

and check the LEDs (11) to see the charge level.

If the battery pack is almost flat, it must be

recharged!

2. Long continuous overloading of the machine will

activate the temperature cut-out.

Leave the machine or battery pack to cool.

Note:

The machine will cool more quickly if you

operate it at idling speed.

3. If the current is too high (for example, if the

machine seizes continuously for long periods),

the machine switches off.

Switch off the machine at the trigger switch (6).

Then continue working as normal. Try to prevent

the machine from seizing.

6.2 Battery pack

Charge the battery pack before use.

If performance diminishes, recharge the battery

pack.

The ideal storage temperature is between 10°C and

30°C.

In case of Li-Ion battery packs with capacity and

signal display (11) (equipment-specific):

- Press the button (12), the LEDs indicate the

charge level.

- If one LED is flashing, the battery pack is almost

flat and must be recharged.

Removing and inserting the battery pack

Removal:

Press the battery pack release button (9)

and pull the battery pack (10) forwards.

Insertion:

Slide the battery pack (10) in until it

engages.

6.3 Setting the direction of rotation,

engaging the transporting safety device

(switch-on lock)

Do not activate rotation selector switch (5)

unless the motor has completely stopped!

Actuate the rotation selector switch (direction of

rotation setting, transporting safety device) (5).

See page 2:

R = Clockwise setting

L = Counter-clockwise setting

0 = middle position: transportation safety device

(Switch-on lock) set

6.4 Selecting gear stage

1. gear (low speed,

particularly high torque, preferable for

screwing)

2. gear (high speed, preferable for drilling)

6.5 Setting torque control, drilling

Turn selector barrel (torque, drilling) (2).

1...20 = Torque setting (with torque control) -

intermediate positions are also possible.

= Drilling level setting (max. torque, without

torque control)

To avoid overloading the motor,do not jam

the spindle.

6.6 Change accessory

Opening the drill chuck:

Turn the drill chuck sleeve (1) clockwise.

Clamping the tool:

Open the drill chuck and insert the tool as far as

possible. Turn the drill chuck sleeve (1) in clockwise

direction until the tool is clamped securely. With a

soft tool shank, retightening may be required after a

short drilling period.

6.7 Switching power tool on/off, setting

speed

Press the trigger switch (6) to switch on the

machine. Press in the trigger to increase the

rotational speed.

5. Overview

6. Use

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Metabo BS 14.4 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info