Bedienungsanleitung Metabo DSD 200 (Seite 13 von 100) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

511060

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

ENGLISH

ENG

19 Rubber stopper *

* depending on equipment/not in scope of delivery

• Bayonet catch on safety guards ensures quick,

easy replacement of grinding wheels

• Low-noise, low-vibration, maintenance-free

induction motor

• Vibration-absorbing rubber feet

BS 175, DS 175, DS 200, DSD 200, DSD 250,

TNS 175:

• Safety guards with extraction connection piece

TNS 175:

• Slow-speed, fine grained wet grinding disc and

high-speed dry grinding wheel

• Corrosion-resistant water bath container

BS 175:

• Large, tilting belt grinding arm (continuously

variable by 90°) for processing wood and metal

workpieces

7.1 Power supply

Before plugging in, check that the rated

mains voltage and mains frequency, as

stated on the rating label, match with your power

supply.

The grinder complies with protection class I and

must therefore only be connected to sockets

earthed according to specifications.

DSD 200, DSD 250 (three-phase version):

Ensure that the grinding wheels have the correct

direction of rotation (the correct direction of rota-

tion is indicated by an arrow on the side safety

guards). If a grinding wheel is rotating in the wrong

direction: Unplug the grinder. The plug comprises

of two phase conducting pins that are mounted on

a rotating socket (phase changing switch). Use a

Phillips screwdriver to rotate this socket.

7.2 Installing workpiece support

Install workpiece support (8) as shown in illustra-

tions A, page 3.

7.3 Fitting spark deflector and eye

preservers

Install the spark deflector (10) and eye preservers

(9) as shown in illustrations B, page 3.

7.4 Installing machine safely

Place the machine on a stable workbench. Ensure

that the machine is securely seated.

The machine can also be bolted down (screws not

included in the scope of delivery). To do this,

fasten the securing screws through the holes in the

rubber feet.

If a stand or wall bracket is used (see Accessories

chapter): bolt down the machine.

7.5 Dust extraction connection (depending

on equipment)

If your machine is not equipped with a

dust extrac-

tion connection (6), fit an extraction device that is

suitable for double-wheeled bench grinders

. Inner

diameter of extraction connection piece: 35 mm.

Before switching on the machine, ensure that the

extraction device is connected and being used

correctly.

7.6 Test run

Check the grinding wheels before initial use.

Test run

A test run of approx. 5 min without load must

be carried out before initial use. All persons must

stay clear of the danger zone when this is

performed.

8.1 Adjusting the workpiece support

Adjust the workpiece supports (8) frequently to

compensate for wear of the grinding wheels (4).

The distance between the workpiece support and

grinding material must be as small as possible and

never greater than 2 mm (see

illustration C, page

If the grinding wheel is so badly worn that the

maximum distance of 2 mm can no longer be

maintained, the grinding wheel must be replaced.

8.2 Adjusting the spark deflector

Adjust the spark deflectors (10) regularly to

compensate for wear on the grinding wheels (4).

Release the 2 screws on the spark deflector and

shift the spark deflector.

The distance between the spark deflector and

grinding wheel must be as small as possible and

never greater than 2 mm (see

illustration C, page

6 Special Product Features

7 Initial Operation

8Use

17026975_0611 DS DSD TNS BS.book Seite 13 Dienstag, 21. Juni 2011 1:48 13

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Metabo DSD 200 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info