Bedienungsanleitung Metabo E 130 (Seite 8 von 39) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Schwedisch, Norwegisch)

658068

Zoom out

Zoom in

Vorherige Seite

1/39

Nächste Seite

ENGLISH

Information on the name plate:

4.1 Placing the machine

Caution!

Always stand the machine on

its feet only.

The machine draws in air at its front

and bottom, which is given off

through the ventilating slots at the

rear. Ensure an unhindered airflow.

The distance of the machine to walls

or other equipment must be at least

cm.

Caution!

Check all connections and

supply lines before turning on.

Note:

For manual arc welding this

machine uses the Hot-start, Arc-force

and Anti-stick functions.

Hot-start function

When contacting the weld metal with the

electrode, the set welding current is

increased for a short period to ensure

that the arc will start.

This brief increase of the welding current

is limited to the maximum electrode cur

rent.

Arc-force function

During the welding process the machine

keeps the energy (heat) brought into the

weld metal at a constant level, even if

the distance between electrode and

weld pool varies.

Anti-stick function

If the machine detects a short-circuit in

the welding process, it will switch to min-

imum current within 0.5 sec to keep the

electrode from burning out.

5.1 Manual arc welding

1. Connect the earth cable to the –

pole.

2. Connect the welding cable to the +

pole.

Caution!

Note information on polarity

shown on the packaging of the elec-

trodes used; reverse polarity, if nec-

essary.

Caution!

For manual arc welding the

Lift-arc ignition must be disabled (not

applicable for E 140 SP/Plus). To

check, turn the rotary switch counter-

clockwise.

3. Attach earth cable at a suitable loca-

tion of the workpiece.

4. Turn master switch ON.

5. Set desired welding current.

The welding machine is now opera-

tional.

5.2 TIG welding

When using a TIG welding torch

(optional accessory), both models can

also be used for TIG welding.

1. Connect the welding current cable

of the TIG torch

(– pole).

2. Check the gas supply to the TIG

torch.

3. Attach the earth cable at a suitable

location of the workpiece (+

pole).

4. Turn master switch ON.

5. Set desired welding current.

6. Activate Lift-arc ignition.

(not applicable for E 140 SP/Plus)

To check, turn the rotary switch

clockwise.

The welding machine is now opera-

tional.

TIG welding

The arc can only be started by touching

the workpiece with the electrode (Lift-arc

ignition).

1 Manufacturer

2 Machine designation

3 Serial number

4 Standard information – This

machine meets the requirements

of the standards mentioned

5 CE mark – This machine con-

forms to EC directives as per

declaration of conformity

6 Waste disposal symbol – the

machine can be disposed of

through the manufacturer

7 Electrical performance data

8 Date of manufacture

3. Operating Elements

9 Welding current regulator

10 E 130, E 150, E 170 Si

Carrying strap/shoulder strap

Adjustable in length for carrying

− by hand (shown in illustra-

tion)

− on the shoulder.

E 140 SP/Plus : carrying handle

345

11 Master switch

switches the unit ON or OFF

12 Equipment-on indicator light

13 Fault indicator light

The LED flashes:

− in case of a low-voltage

condition

− in case of an over-voltage

condition

− in case of excessive an

operating temperature.

14 Selector switch

Manual Arc MMA – TIG DC

(lift-arc ignition)

(not applicable for E 140 SP/Plus)

15 Welding current socket (+ pole)

16 Welding current socket (– pole)

LED = Light-Emitting Diode, used as

indicator light.

4. Preparing for Operation

5. Operation

>20 cm

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Metabo E 130 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info