Bedienungsanleitung Metabo E 170 Si (Seite 7 von 39) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Schwedisch, Norwegisch)

658072

Zoom out

Zoom in

Vorherige Seite

1/39

Nächste Seite

ENGLISH

1. Please Read First!.......................7

2. Safety Information ......................7

2.1 Specified conditions of use ...........7

2.2 General safety information............7

2.3 Symbols on the machine ..............7

3. Operating Elements....................8

4. Preparing for Operation .............8

4.1 Placing the machine .....................8

5. Operation.....................................8

5.1 Manual arc welding.......................8

5.2 TIG welding...................................8

5.3 Shutting down...............................9

6. Maintenance................................9

7. Available Accessories...........9/39

8. Repairs.........................................9

9. Environmental Protection..........9

10. Disorders .....................................9

11. Trouble Shooting ........................9

12. Technical Specifications..........10

These instructions are written in a way

that will enable you to safely use the

machine in a minimum of time. Here is

how to read the instructions:

− Read these instructions completely

before use. Pay special attention to

the safety information.

− These instructions are intended for

skilled arc weldors or other special-

ists of similar qualification.

− Keep all documents supplied with

the machine for future reference.

Retain proof of purchase for possi

ble warranty claims.

− If you hire out or sell this machine be

sure to hand over all documents

supplied with the machine.

− The equipment manufacturer is not

liable for any damage arising from

disregard of these instructions.

The information in these instructions is

marked as under:

Danger!

Warning of personal

injury or environmental

damage.

Risk of electric shock!

Risk of personal injury

by electric shock.

Caution!

Risk of material damage

Note:

Supplementary informa-

tion.

− Numbers in illustrations (1, 2, 3, ...)

− indicate component parts;

− are consecutively numbered;

− refer to the corresponding num-

bers in brackets (1), (2), (3) ... in

the neighbouring text.

− Instructions to be carried out in

sequence are numbered.

− Instructions which can be carried

out in any sequence are preceded

by a bullet (•).

− Listing are preceded by a M-dash (–).

2.1 Specified conditions of

use

This welding machine is intended for

welding all metals.

The welding machine and the accessory

kit supplied conform to the relevant regu-

lations applicable at the time of delivery.

This welding machine is intended for

operation by professional arc weldors or

specialists of similar qualification.

Permissible welding processes:

− Manual arc welding

− TIG DC (with optional accessories)

for all metals, except aluminium.

For machine performance see “Techni-

cal Specifications”.

Any other use is not as specified and

prohibited.

Unspecified use, modification of the

machine or use of parts not tested and

approved by the equipment manufac

turer could cause unforeseeable dam-

age!

2.2 General safety informa-

tion

• When using this machine, observe

the following safety instructions to

exclude the risk of personal injury or

material damage.

• Follow the specific safety instruc-

tions in the respective chapters.

• Follow the legal directives or regula-

tions for the prevention of accidents

pertaining to the handling of arc

welding machines.

Danger!

Electric potential!

• Connect the machine only to a prop-

erly earthed outlet.

If in doubt check with a qualified

electrician!

• Service and repairs to the machine

must only be made by qualified elec

tricians.

• Unplug before removing the

machine's cover.

Danger!

• Wear sufficient protective clothing

when welding.

• Always use a welding visor and

welder's gloves.

They provide protection against fly-

ing sparks and arc radiation.

• All metal fumes are detrimental to

health!

When working indoors ensure suffi-

cient ventilation and extraction in

order to not exceed the max. per-

missible workplace pollutant con-

centration.

The fumes of lead, cadmium, cop-

per, chromium, nickel, zinc and

beryllium are particularly harmful!

Caution!

• Never weld earthed metal.

Welding earthed metal may cause

damage to the protective earth con-

ductors by stray currents.

• Never use the welding machine for

thawing pipes.

• Always attach the earth cable

directly to the weld metal and as

close as possible to the welding

spot.

• Always carry the welding machine at

the carrying strap when transport-

ing it.

• Special care is required when work-

ing near computers, electronically

controlled equipment or in the prox-

imity of magnetic data media (sound

recording tapes, floppy disks, data

recording tapes, credit cards, etc.).

The arc start can cause misfunction

of this type of equipment or data

loss.

2.3 Symbols on the machine

Arc welding with coated

stick electrodes

Tungsten Inert-gas Welding

(TIG welding)

(not applicable for

E 140 SP/Plus)

Table of Contents

1. Please Read First!

2. Safety Information

XS0015E3.fm Original operating instructions DEUTSCH

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Metabo E 170 Si Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info