Bedienungsanleitung Metabo FSR 200 INTEC (Seite 9 von 52) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

600629

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

ENGLISH en

- Swivel clamping lever (3) downwards as shown in

illustration on page 2. This opens the clamp rail.

- Slide sanding disc under clamp rail.

- Clamp sanding disc on other side with clamping

lever (3).

- Pull sanding disc tightly over the sanding plate

and clamp to the other side with clamping

lever (3).

Hole punch

In non-perforated sanding discs, the hole punch

can be used to punch your own holes for dust

extraction.

- Install sanding disc on sander.

- Place sander on hole punch (8) as shown in the

illustration on page 2and press downwards.

7.1 Switching On and Off

Switching on:

Move switch (4) to "I" position.

Switching off:

Move switch (4) to "O" position.

7.2 Dust Extraction

To optimise the dust extraction performance, fit the

sanding disc such that the holes on the sanding disc

(1) and sanding plate (2) are aligned.

Integrated extraction system:

Install the dust collection box (5) (see illustration,

page 2). To optimise the extraction performance,

empty the dust collection box (5) in good time and

clean the filter (7).

External extraction system:

Fit dust extraction nozzle (see chapter on

Accessories). Connect a suitable extraction device.

Use a suction hose with a 35 mm connector

diameter. See Accessories section.

Note:

When sanding abrasive material

(e.g. plaster, etc.) we recommend connecting

a suitable dust extractor.

Empty dust collection box (5).

- Open cleaning flap (6).

- Empty dust collection box (5).

- Remove fluted filter (7) and knock off dust stuck to

filter or remove with brush.

- When inserting, ensure that the fluted filter (7) is

inserted in the lateral guides.

Clean the machine regularly. This includes

vacuum cleaning the ventilation louvres on the

motor.

Replacing worn sanding plate (2)

- Remove fixing screws (on lower side of sanding

plate).

- Take off sanding plate.

- For sanding plate (as replacement), refer to the

Accessories chapter.

- Mount sanding plate.

- Refit fixing screws (on lower side of sanding plate)

and tighten.

Use only genuine Metabo accessories.

See page 4.

Use only accessories which fulfil the requirements

and specifications listed in these operating instruc-

tions.

ASanding plate (as replacement)

B Dust collection box with fluted filter for multiple

cleaning (as replacement)

C Fluted filter (as replacement)

D Perforated adhesive sanding discs for wood

and metal, 115 x 103 mm

E Perforated adhesive sanding discs for wood

and metal, for clamping 115 x 140 mm

F Perforated adhesive sanding discs for paint,

lacquer, spattle, 115 x 103 mm

G Perforated sanding discs for paint, lacquer,

spattle, for clamping, 115 x 140 mm

H Dust extraction connection

I Metabo universal vacuum cleaner

For complete range of accessories, see

www.metabo.com or the main catalogue.

Repairs to electrical tools must be carried out

by qualified electricians ONLY!

If you have Metabo electrical tools that require

repairs, please contact your Metabo service centre.

For addresses see www.metabo.com.

You can download spare parts lists from

www.metabo.com.

Observe national regulations on environmentally

compatible disposal and on the recycling of disused

machines, packaging and accessories.

Only for EU countries: Never dispose of

power tools in your household waste! In

accordance with European Guideline 2002/

96/EC on used electronic and electric equipment

and its implementation in national legal systems,

used power tools must be collected separately and

handed in for environmentally compatible recycling.

Explanatory notes on the specifications on page 3.

Changes due to technological progress reserved.

D =Dimensions of sanding plate

=Nominal power input

=Power output

=orbital frequency at no load

=orbital frequency at nominal load

S =Oscillating circuit diameter

Intec =Dust collection box

m =Weight without mains cable

Measured values determined in conformity with

EN 60745.

7. Use

8. Cleaning, Maintenance

9. Accessories

10. Repairs

11. Environmental Protection

12. Technical Specifications

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Metabo FSR 200 INTEC Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info