Bedienungsanleitung Metabo HHS 55 (Seite 8 von 52) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

600779

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

ENGLISHen

hedge) and the stoppage cannot be corrected by

pulling the hedge trimmer back, the motor must first

be switched off and the plug removed from the

socket before the cause of the blockage can be

removed manually from the cutting blade.

For other activities (e.g. remo

ving twigs or cuttings),

deposit the machine outside the working area.

Lay the machine down such that persons are not at

isk.

When you have laid the hedge trimmer down, pull

the

plug from the socket.

For storage and transportation, always slide the

closure onto the cutting blades. (It has been slid

on correctly if the Metabo lettering faces upwards).

Only carry the machine by the bow-type handle.

5. Overview

See page 2.

1 Switch (safety two-hand operation)

2 Switch (safety two-hand operation)

3 Bow-type handle

4Hand protection

5Enclosure

6 Cutting blades

7 Impact protection with twig

feed

8 Cable strain relief device

* depending on model

6. Commissioning

Before plugging in, check to see that the

rated mains voltage and mains frequency,

s stated on the rating label, match with your

power supply.

To prevent the hedge trimmer plug

from

inadvertently being pulled out of the coupling socket

of the extension cable, attached the extension

cable to the cable strain relief device as shown (8) 

(Figure on page 2).

Note: the cable tension device is designed to hold

approved extensi

on cables (H07 RN-F 3G1,5 /

3G1,0) that are used most frequently for external

applications.

Check Quick stop:

Switch machine on briefly and then off ag

ain. Have

the machine repaired if braking time is clearly

lengthened.

7. Use

7.1 Switching On and Off

Switching on (

safety two-hand operation):

• For normal applications: Press switch (1) an

switch (2).

To switch off:

Release one of the two actuated

switches.

Thanks to the patented Quick

stop, the cutting

blades come to a standstill within 0.05 seconds.

Have the machine repaired if braking time is

clearly lengthened.

The noise that sometimes o

ccurs during a machine

Quick stop is design-related and has no influence

on operation and service life.

7.2 Cleaning the cutting blade 

(after every use)

Before cleaning: 

Switch the machine off. 

Pull the mains plug out of the socket.

Wear protective gloves.

Remove contamination, remains

of blades etc. (e.g.

with a brush or cloth)

After cleaning: Treat cutting bla

de with Metabo

hedge trimmer care oil 6.30474 or Pump Spray

6.30475 (biologically degradable).

8. Maintenance

It is advisable to have blunt cutting blades

sharpened in a specialist workshop. Check cutting

blades regularly for damage and have them

repaired in a specialist workshop immediately if

necessary.

9. Accessories

Use only genuine Metabo accessories.

For a complete range of accessories, see

w.metabo.com or the main catalogue.

10. Repairs

Repairs to electrical tools must be carried out by

qualified electricians ONLY!

Contact your local Metabo represen

tative if you

have Metabo power tools requiring repairs. For

addresses see www.metabo.com.

You can download a list of spare parts from

w.metabo.com.

When replacing the carbon brushes, for safety

reasons the safety device (spare parts list,

Pos

. 26) must also be replaced.

11. Environmental Protection

Observe national regulations on environmentally

compatible disposal and on the recycling of disused

machines, packaging and accessories.

Only for EU countries: Never dispose of

power tools in your househ

old waste! In

accordance with European Guideline 

2002/96/EC on used electroni

c and electric 

equipment and its implementation in

national 

legal systems, used power tools must be collected

parately and handed in for environmentally

compatible recycling.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Metabo HHS 55 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info