451433

Metabo HS 6000 Seite 11

11
Zoom out
Zoom in
Vorherige Seite
1/52
Nächste Seite
11
ENGLISH
1. Machine overview.....................10
2. Please read first!.......................11
3. Safety.........................................11
3.1 Specified conditions of use.........11
3.2 General safety instructions .........11
3.3 Safety devices ............................11
3.4 Symbols on the machine ............12
3.5 Symbols used throughout
these instructions........................12
4. Special product features..........12
5. Transportation and
installation.................................12
5.1 Machine installation ....................12
5.2 Screw in the oil filler cap .............12
5.3 Power connection .......................12
5.4 Initial operation ...........................13
6. Operation...................................13
6.1 Splitting.......................................13
6.2 Changing the start position of
the splitting knife.........................14
7. Care and maintenance .............14
7.1 Changing the hydraulics fluid......14
7.2 Clean the oil filter........................14
7.3 Machine storage .........................15
7.4 Maintenance ...............................15
8. Available accessories .........15/51
9. Repairs.......................................15
10. Trouble shooting ......................15
11. Technical specifications .......... 16
• Read these instructions before initial
operation. Pay special attention to
the safety instructions.
• If you notice transport damage while
unpacking, notify your supplier
immediately. Do not operate the
machine!
• Dispose of the packing in an envi-
ronmentally friendly manner. Take
to a proper collecting point.
• Keep these instructions for refer-
ence on any issues you may be
uncertain about.
• When you hire or sell the machine,
have all documents supplied go with
it.
3.1 Specified conditions of
use
This machine is only intended for split-
ting firewood as detailed in these instruc-
tions. Any other use is not as specified.
Unspecified use, modifications to the
machine, or use of parts not tested and
approved by the equipment manufac-
turer may cause unforeseeable damage!
This machine is intended for operation
by one person. Other persons shall keep
a sufficient distance to the machine.
Observe the permissible dimensions of
logs to be cut (see "Technical specifica-
tions").
Do not overload machine – use it only
within the performance range it was
designed for (see "Technical specifica-
tions").
3.2 General safety instruc-
tions
When using this machine, observe the
following safety instructions to exclude
the risk of personal injury or material
damage.
Please also observe the special safety
instructions in the respective chapters.
Where applicable, follow the legal direc-
tives or regulations for the prevention of
accidents pertaining to the use of log
splitters.
A
General hazards!
Be alert. Know what you are doing. Be
sure you are capable of doing this type
of work. Do not operate machine while
under the influence of drugs, alcohol or
medication.
Keep your work area tidy – a messy
work area invites accidents. Regularly
clear the work area of split wood.
Prevent adverse body positions. Ensure
firm footing and keep your balance at all
times.
Take all surrounding conditions into due
account.
Ensure that there is sufficiently good
lighting.
Do not operate machine near inflamma-
ble liquids or gases.
This machine shall only be started and
operated by a person familiar with log
splitters and who is at all time aware of
the dangers associated with the use of
such a machine.
Keep bystanders, particularly children,
out of the danger zone. Persons under
18 years of age shall use this machine
only in the course of their vocational
training, under the supervision of an
instructor.
Do not permit other persons to touch the
machine or power cable while it is run-
ning.
B
Danger! Risk of electric shock!
To ensure that the machine remains
weatherproof, before any use check to
see that switch, power cable and plug
are not damaged (no splits, cracks, etc.)
Do not use the power cable for any pur-
pose it is not intended for (power cable is
not included with this machine).
A
Risk of personal injury and
crushing by moving parts!
Do not operate the machine without
installed guards.
Keep sufficient distance to driven com-
ponents when operating the machine.
Ensure the machine is disconnected
from power supply before servicing.
Ensure that when switching on (e.g. after
servicing) no tools or loose parts are left
on or in the machine.
Turn power off if the machine is not
used.
A
Hazard generated by modifica-
tion of the machine or use of parts
not tested and approved by the equip-
ment manufacturer!
Use only parts approved by the equip-
ment manufacturer. This applies particu-
larly to:
− Hydraulic lines (see "Spare parts
list" for stock numbers);
− Safety devices (see "Spare parts
list" for stock numbers).
Do not change any parts.
A
Hazard generated by machine
defects!
Keep machine and accessories in good
repair. Observe the maintenance
instructions.
Each time before starting up the
machine, check it for signs of possible
damage. Before proceeding to use the
machine, carefully inspect all safety
equipment, safety systems, and any
slightly damaged parts to ensure that
these function trouble-free and as
intended. Check to see that all moving
parts work properly and do not jam. All
parts must be correctly installed and
meet all conditions necessary for the
proper operation of the machine.
Damaged protection devices or parts
must be repaired or replaced by a quali-
fied specialist. Have damaged switches
replaced by a service centre. Do not use
this machine if the switch cannot be
turned ON or OFF.
Keep handles free of oil, grease and
resin.
3.3 Safety devices
Safety valve
The safety valve prevents motor dam-
age caused by overload when the split-
ting knife is blocked or jammed. The
safety valve is sealed and must never be
tampered with. Do not attempt to adjust
it.
No-voltage release
The no-voltage release feature prevents
the machine from starting up when the
power is restored after a power failure.
Table of Contents
2. Please read first!
3. Safety
… 11 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Metabo HS 6000 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info