Bedienungsanleitung Metabo HS 6001 (Seite 12 von 56) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch)

451434

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

ENGLISH

ting knife is blocked or jammed. The

safety valve is sealed and must never be

tampered with. Do not attempt to adjust

it.

No-voltage release

The no-voltage release feature prevents

the splitter from starting up when the

power is restored after a power failure.

Two-hand operation

Two-hand operation ensures that the

splitting knife travels downward only

when both operating levers are simulta-

neously pressed down.

Safety gate

The safety gate prevents the split parts

of a log falling from the table, possibly

injuring the operator.

3.4 Symbols on the Splitter

Danger!

Disregard of the following

warnings could lead to severe per-

sonal injury or material damage.

Read these instructions

before initial operation.

When operating this

splitter, do not place

your hands under the

splitting knife.

Protect your feet from

falling pieces of wood.

Danger of personal

injury. Body parts and

clothing can be caught

by moving parts.

Do not remove or disa-

ble safety devices.

Do not clean, service or

adjust this machine dur-

ing operation.

Risk of electric shock!

Wear protective gloves.

Wear non-slip safety

shoes.

Wear hearing protection.

Wear protective specta-

cle.

This splitter is intended

for operation by one per-

son only.

3.5 Symbols Used Through-

out These Instructions

Danger!

Indicates risk of personal injury or

severe material damage.

Risk of electric shock!

Risk of personal injury by electric

shock.

Caution!

Risk of material damage

Advisory note:

Supplementary information.

• Robust welded steel construction for

maximum torsional stability.

• Two-hand control for safe operation.

• 6 tons of ram force.

• Wheel set for easy moving.

• Support table adjusts to 3 positions.

5.1 Machine Installation

Danger!

This splitter shall only be operated at

a location meeting the following con-

ditions:

− level, non-slip ground

− splitter must stand firmly on the

ground

Note:

Have another person help you to

unpack, assemble and install the splitter.

1. Transport the splitter on the pallet to

a suitable location.

2. Remove packing and enclosed

parts.

3. Lift splitter off the pallet.

4. Assemble the components (assem-

bly is described in the following sec-

tions):

− wheel set

− operating levers

− safety gate

− work table

5. Vent the hydraulic system.

5.2 Transport

1. Close the oil reservoir cap before

moving.

2. Hold the splitter with both hands at

the transport handle and tip over

slightly.

3. After moving:

Open oil reservoir cap until the

hydraulic oil reservoir is vented.

Danger when hoisting by

crane!

Do not lift and move the splitter by

the transport handle.

Use suitable transport straps to hoist

the splitter by crane.

5.3 Installing the Wheel Set

1. Put the axle through the holes in the

cladding of the splitter's base (13).

4. Special Product Features

5. Transport and Installa-

tion

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Metabo HS 6001 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info