ENGLISH en
17
10.4 Adjust the cutting laser
Align the laser perpendicularly
– Loosen th (. Rotate laser.
Tighten the middle screw (41) .
Align laser laterally
– Loosen th (43) and (42) .
Shift the laser horizo (43)
and left screw (42) .
10.5 Cleaning the pump
Remove chips and saw dust w
or brush from:
– adjustment installations
–c
– motor vent slots;
– space under table insert;
– cutting laser;
– illumination of
10.6 Storage of device
Danger!
Store the device in su
put into operation by unauthoris
Ensure that the stationary device cannot cause
injury.
Caution!
Do not store the tool outdoors or in damp
conditions without protection.
10.7 Maintenanc
Prior to each use
Remove saw chips with vacuum or brush.
Check power cable and
battery pack for damage; if necessary have
damaged parts replaced by a qualified
electrician.
Check all movable parts if they can be moved
freely across the entire range of move
Regularly, depending on conditions of use
Check all screwed joints, retighten if necessary.
Check reset function of the saw head (saw head
has to return to the upper starting position by
means of spring force)
replaced.
Slightly oil guide elemen
– Use appropriate supports on the left and right of
the saw for long workpieces.
– Hold workpiece on the right of the saw blade for
suitable cuts.
– When cutting
(a suitable wooden board attached
to the guide of the device, can be used as
additional guide).
– When cutting a curv (53)
place the convex side at the parallel guide/
ripping fence.
– Do not cut workpiece upright, but flat on the
turntable.
Use only genuin
Use only acce
and specific
instructions.
For particular job
accessories at your speciali
can be found at the beginning of these op
instructions.
A Spray for maintenance and care for the
removal of resin residues and t
metal surfaces. 0911018691
B Extraction adapter "Multi" for the connection of
extraction hoses with 44, 58 or 100 mm adapter
0910058010
C Metabovacuum cleaner (see
catalogue)
D Stan
Universal machine stand UMS 6.3131700
Mobile stand KSU
6.3131800
Stand KSU 400 0910066110
E Roller s
RS 420
RS 420 G
RS 420 W
Saw blades for KGS 216 M /
F S
216 × 2.4 / 1.8 × 30 24 WZ 5° neg
for longitudinal an
G Saw blade Precision Cut Classic 6.28060
216 × 2.4 / 1.8 × 30 40 WZ 5° neg
for longitudinal an
and chipboard
H Saw blade Multi Cut Cl
216 × 2.4 / 1.8 × 30 60 FZ/TZ 5° neg
for longitudinal an
materials, laminate, plastic and aluminium profiles
Saw blades for KGS 254 M:
I Saw bla
254 × 30 x 2.4 / 1.8,48 WZ 5° neg
for longitudinal an
and chipboard
J Saw blade Multi Cut 6.28223
254 × 30 x 2.4 /1.6, 80 FZ/TZ 5° neg
for longitudinal an
materials, laminate, plastic and aluminium profiles
Saw blades for KGS 305 M:
K Saw blade Precision Cut Classic 6.28064
305 × 30 x 2.4 /1.8,56 WZ 5° neg
for longitudinal an
and chipboard
L Saw blade Multi Cut 6.28091
305 x 30 x 2.8/2.0 96 FZ/TZ 5° neg,
for longitudinal an
materials, laminate, plastic and aluminium profiles
Saw blades for KGS 18 LTX 216
M S
216 × 1.8 / 1.2 × 30 40 WZ 5°
for longitudinal an
and chipboard
For a complete range of accessories, see
www.metabo.com or the catalogue.
Danger!
Repair of po
qualified electrician
If you have Metabo power tools that require
repairs, please contact your Metabo servic
centre. For addres
You can down
www.metabo.com.
Observe national
compatible
disused machines, packaging and accessories.
Only for EU countries: Never dispose of
power tools in your household waste! In
accordan
96/EC on waste electrical and
equipment and its implementation in national
legal systems, used powe
collected separately and handed in for
environmentall
Following y
and faults that you may remedy yourself. If the
corrective measures desc
kindly refer to chapter 13. "Repairs".
Danger!
There are particularly many accidents in
connection with problems and faults. Therefore
keep in mind:
Prior to
plug or remotachable battery pack
(34).
Check that all safety devices are operational
again after each fault service.
No trimming function
Transport lock activated:
pull out transport lock.
Safety lock activated:
loosen safety lock.
Cutting power too low
Saw blade blunt (p
blade body);
Saw blade unsuitable for the material (see
chapter 12. "Acc
Saw blade contorted:
Replace saw blade (see chapter 10.
"Mainten
Saw vibrates a lot
Saw blade contorted:
Replace saw blade (see chapter 10.
"Mainten
Saw blade not installed properly:
Install saw blade prop
"Mainten
Turntable hard to turn
Chips under turntable:
remove chips.
Explanatory notes on th
Changes due to technolo
U =
I=
F =
P
1
=r
IP =
n
0
=n
v
0
=
D =
d =
b = max. tooth width of the saw blade
A =
m=
Requirements for chip and dust e
D
1
=
nozzle
D
2
=
D
3
=msur
nozzle
D
4
=
Maximum cross-section
on page 4.
~ AC Power
Direct current
Machine in
The technical specification
tolerances (in comp
standards).
Emission values
These values make it poss
emissions fror tool and to compare
different power tools. Depend
conditions, th the power tool or the
accessories, the actual load may be higher or
lower. For assessment purposes
breaks and periods when
on the adjusted es, arrange protective
measures for the user
measures.
Vibration total
(vector sum of three
directions)
EN 61029-1:
a
h
=
K
h
= = uncertainty
Typical A-effective perceived sound levels
:
L
pA
=
L
WA
=
K
pA
, K
WA
= uncertainty
Wear ear protectors!
11. Tips and Tricks
12. Accessories
13. Repairs
14. Environmental Protection
15. Troubleshooting
16. Technical Specifications
